Questions? Call Us : (630) 254-1458

July 1, 2022

Shop

  • Available ONLY through Uncle Al's Toys is this ALL TIN replica robot driver head for the rare 'Y' Company Space Patrol Car. This head was created from photographs of the auction car from the Griffith's Auction of 2000. Only two tabs held the original head to the toy, which is probably why so many heads were lost. Also available for this car are replacement hub caps and tinted windshield!
  • A reproduction metal cast canon barrel for the early 1900's Large Marklin battleships. The barrel will fit other battleships, like the Battleship New York and the Columbia. My cast barrels pick up all of the fine details of the original. I individually drill each barrel center to the correct inner diameter and add a tiny breach hole at the rear. The barrel measures 2" long. A barrel comes in a patina condition to reflect the condition of your toy, or it can be patinated as new for completely restored toy boats. I had the pleasure of performing intricate repairs on a Columbia Battleship from the Malcolm Forbes Collection. Other custom parts are available upon request.
  • The Buffalo Toys Hy-Lo Ferris Wheel was the very first Ferris Wheel toy known to be produced in the United States. The toy was produced from the mid to late 1920's. The toy was created to resemble The Great Ferris Wheel, built for the 1893 World Fair. The toy has six revolving carriages, and each car is shown with eight people in the standing position, which was how passengers were carried in the Great Ferris Wheel. The toy is all tin and utilizes a spring and twisted metal rod propulsion system. As the twisted rod is pulled straight up through the trap doors, tension from the spring pulls the rod back down into the tower, turning the two-inch gear and spinning the wheel. Buffalo Toys used this mechanism in several of their other toy offerings. This Ferris Wheel has been in my personal collection for several years and is in very fine condition for a 100-year-old toy!
  • 1930's Strauss Tin Litho Wind-up Inter-State Bus (Green version) - Produced by the Ferdinand Strauss Company of New York. The The litho shows normal play wear and the wind-up mechanism has a built-in key that is in good working order.
  • A great replacement tire for the 1930's Tippco Mercedes Fuhrerwagen Staff Car. The tire is created from a mold taken of an original part. It is made of SOLID RUBBER and a perfect fit, just like the original. The tire can be purchased individually or in a set of five to complete one car. Other Tippco Mercedes parts are available.
  • 1930's Wyandotte Boat Tail Racer with Lights in excellent original condition with replacement lights and tires that have been patina aged to match the condition of the racer. The paint has original luster and moderate overall patina. The racer is missing the headlight bar and sold in as-is condition.
  • This is a replacement head for the 1939 Ideal Novelty and Toy Company, Superman composition toy/doll figure. This is the first known Superman toy and they are extremely rare and in high demand. This replacement head was created from a mold made of an original head. This resin cast replacement comes with a metal loop inside, just as original, so that it will accept the spring and metal  hook that comprise the flexible joints of the legs. Please allow 14 days from the time of ordering and purchase as these are made to order.
  • A 1950's Wyandotte Auto Transport Truck with 4 plastic cars. The toy is approximately 9" long and is an all-metal transport cab and trailer with 4 plastic vehicles in excellent condition!
  • Just like the original, this fin is faithfully recreated in tin. To make each half of the fin shape, custom stamping dies were created from an original Atom Jet fin. The halves are hand-assembled, and each new fin is then pre-fitted to an original toy ensuring accuracy and a perfect fit. We complete the fin with paint colors matching as close as possible to the original colors. The results are undeniable and sure to please. Installation is a breeze because the fin snaps easily into place like the original. *WE MAKE EACH FIN TO ORDER, SO PLEASE ALLOW EIGHT WEEKS FOR COMPLETION.*
  • Battery-operated, remote-control Crane toy, made in Japan by SKK Toy. SKK would later collaborate with Bandai Toys to create some of the most detailed and mechanically diverse toys of that time. This toy has forward and reverse motion and crane performs lifting action, as well as directional steering via the corded remote. This toy is in excellent, fully working condition and is quite rare to find.
  • A 1950s Noma Lites Village Church lighted windup musical display.  The church features faux stained-glass windows, a bell in the church steeple and flocked bottle brush trees surrounding it. The music box winds in the back and plays Silent Night. Both the music box and the interior light are in good working condition. This is the largest Noma Church display from the 1950's. The display is made of a light weight plastic in fairly good condition overall. There appears to be a crack in the front right snowy corner, but the display is intact and beautiful. Please be sure to watch the video and check out all of the photos! The church comes packaged in its original shipping box. The box is in excellent condition and the shipping tag features all of the shipping information, including the date it was mailed. A true Christmas Time Capsule and a really beautiful piece!
  • 1950's Irwin Toys Spaceman wind up toy in beautiful replica box made in the USA. Spaceman is a plastic wind up toy just under 11" tall to the top of his antenna. When you wind him up he walks forward with a swaying motion and alternately swings his ray guns. This toy was molded in several colors, RED being one of the rarest. The arms of this toy are the common orange but the body is RED.
  • A 1952 Gama Cadillac 300 tin friction powered toy in excellent original condition. Red body paint with a white tin roof. This toy has been in my personal collection for several years and will be a beautiful addition to any tin toy car collector's fleet.
  • This is a 1954 Tonka Jewel Tea Co. Truck and Trailer Pressed Steel toy. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is essentially 100% original, with the exception of the repainted fuel tanks behind the cab. It has minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka or private label collector and has been a part of my personal collection for many years. The Jewel Tea Company operated a door-to-door delivery business from 1899 to 1981 delivering groceries and other household items from their catalog. Tonka partnered with companies like Jewel to create private label toys.
  • This is a 1954 Tonka Livestock Truck and Trailer in extremely nice original condition with signs of light play wear. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is 100% original and complete with dolly wheels and rear trailer gate ramp. It has very minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka collector and has been a part of my personal collection for many years. Part of the Livestock Series, the truck will make a wonderful addition to any pressed steel collection.

    Discover the Best Vintage Toys Online

    Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • 1954 Tonka MFD Arial Ladder Fire Truck No 5, highly prized by Tonka collectors. This is the first production year that the Arial Ladder.  The pressed steel fire truck is in original, unrestored condition, shows light playwear and is complete with ladders. This is a beautiful and rare first edition toy. A must have for your pressed steel toy collection!
  • 1954 Tonka Wrecker Tow Truck Official MM (Mound, Minnesota) Service, a must have by Tonka collectors. This is the first year of the Ford style, round fendered truck toys that Tonka will produce. The pressed steel wrecker is in extremely nice, original condition and shows light playwear. This toy has never been cleaned (other than dusting) and has never been polished so the extraordinary patina is tremendous! A great piece for your pressed steel toy collection!   Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • 1956 Vintage Bandai 579 Messerschmitt KR200 Bubble Top Tin Toy Friction Car, in very nice, played with condition. The friction drive works well, and the top can be opened to view the interior.
  • A 1957 Tonka Fire Truck Pumper with Fire Hydrant Pressed Steel highly sought after by Tonka collectors. The pressed steel truck is in original condition and shows light playwear. It is complete with the hoses, ladders, and fire hydrant. Add this beautiful piece to your pressed steel collection today! This is the perfect companion piece to the 1957 Tonka Arial Ladder Fire Truck. With the addition of the Tonka Rescue Metro Van, you'll have the complete B-212 Fire Rescue Set that was available for 1957!
  • This listing is for a 1957 Tonka Hydraulic Dump Truck. The copper brown truck shows some play wear and the piston for the truck bed does not work. Still a wonderful display piece at a great price. Please review the photos as they are part of the description and show the condition detail. Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • This is an extremely nice, played with condition, 1957 Tonka No.16 Gas Truck. This is one of my favorite Tonka Trucks from my private collection. It is complete with all three of its access doors. A very nice addition to your Tonka or Pressed Steel collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • A 1957 Tonka Rescue Squad No 5 Fire Dept Metro Van, a favorite of Tonka collectors. The pressed steel van is in original condition and shows moderate playwear. The Rescue Metro Van is also part of the 3-piece Tonka B-212 Fire Rescue Set that was also available in 1957. This toy has reproduction door handles in the rear and new headlights. Add this beautiful piece to your pressed steel collection today! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • 1957 Tonka TFD Aerial Hook and Ladder Fire Truck No 5, highly prized by Tonka collectors. The pressed steel fire truck is in original, unrestored condition, shows light playwear and is complete with ladders. A must have for your pressed steel toy collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure ToysAntique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation ToysWind Up Toys Join us on social media. Facebook | Instagram LinkedIn Twitter 
  • A 1960's Marx Bristol 188 XF926 Jet Aeroplane. A very clean battery-operated toy in excellent working condition. The Bristol 188 XF-926 Jet airplane was made in Japan and was modeled after an experimental aircraft designed by and made by the Bristol Aircraft Company in the 1950's. The toy engines "power up" and light up one after the other. The jet then taxis along for a short distance, stops and repeats. One of the many Marx battery operated fighting jets in amazing condition!
  • 1965 Tonka Dump Truck No. 315

    $373.75 IL Sales Tax 8%
    A near mint 1950s Tonka Dump Truck No. 315 with its original box and a small sale sheet featuring a Tonka construction hat. The box has age wear from being in a basement for years but is sturdy and sound. The red/yellow color combination truck shows no playwear, and the tires are perfect. There's a slight tinge of oxidation on the front bumper. Not terrible, but worth mentioning to the discerning collector. Also included is a little promo sheet that came with the toy, offering a value discount on the purchase of a Tonka hardhat.
  • 1968 Dodge Dart 440 GTS diecast

    Produced by Ertl in 2005, the 1968 Dodge Dart 440 GTS diecast model car 1:18 scale is part of a Limited Edition of 2500 cars. A true-to-scale replica of MOPAR Champion Ron Mancini's bumble bee-striped SS/EA 440 Dart, which on its first time out created a new class record of 12.02, 118 mph. Ron drove it to the world record and second place overall in national points in 1968 and was only edged out by another Dodge in the last race of the season. This diecast model is No 7 in the Series and features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.25, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors!
  • 1969 1/2  Plymouth Road Runner Diecast

    Produced by Ertl Collectibles in 2008, the 1969 1/2 Plymouth Road Runner diecast model car is No. 10 in the Sox & Martin Series and part of a Limited Edition. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth Road Runner. The mid year introduction of the 440 6BBL Road Runner was designated to bridge the gap between the 383 cubic inch V-8 and the much more costly 426 HEMI. The 69 1/2 6BBL package included a flat black fiberglass hood, four speed manual trans, a Dana rear axle with a 4.10 gear ratio, and three two carburetors a top an aluminum Edelbrock intake manifold and was rated 390 hp. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11.25, W-4.5, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors!
  • Produced by Ertl Collectibles in 1996, the 1969 Dodge Daytona Charger 1:18 scale diecast model car is part of the American Muscle series Collector's edition. The 426 Hemi MOPAR diecast model features true-to-scale details. Opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.25, H-3 inches. The model is still in its original packaging and the box shows minimal storage wear. A must have for true collectors!
  • 1969 Plymouth GTX Diecast Super Stock Model Car

    Produced by Ertl Collectibles in 2000, the 1969 Plymouth GTX diecast model car is No. 2 in the Heritage Series and part of a Limited Edition of 5000 cars. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth GTX. The team won many national events and titles over the years and ran many different cars and classes.  They competed in NHRA, AHRA and IHRA sanctioned events, and they would modify the car to fit the class at that event. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-13.5 x W-6.25 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors!
  • The 1969 Pontiac GTO Restoration Alley diecast model car by MotorMax is a limited edition model of 1200 pieces. The highly-detailed model features opening doors and trunk, removable front hood, chrome accents, and posable front tires.  The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-14 x W-6.5 x H-4.75 inches. The model is new in its original packaging with the plastic banding still around the model.  The box shows minimal storage wear. A must have for true collectors!
  • Produced by Ertl Collectibles in 2002 the 1970 Plymouth Cuda diecast model car is Pro Stock Series #4 Issue No. 4 and part of a Limited Edition. This model is a true-to-scale replica of the 1970 Plymouth driven by professional drag racer Don Grotheer.  Don's Super Stock Plymouth race cars were always a contender at any racing event. His familiar orange, blue and white race cars looked as good as they ran. In 1970 he built and raced one of the first Barracuda Pro Stockers. The new Pro Stock class was a heads up class, with no handicaps. It also allowed the racers the use of fiberglass hoods and fenders and many engine modifications. These rules resulted in some of the fastest door slammers in the sport of drag racing at the time. This 1970 Plymouth Cuda diecast model features opening hood and doors, race oil pan, a detailed 426 Hemi Engine, authentic paint colors and a beautifully detailed interior. The dimensions of the car are approximately L-10, W-4, H-3 inches. The window box dimensions are L-13.5 x W-6.5 x H-6 inches. The model is still in its original packaging. It was never displayed and the box shows minimal wear from storage. A must have for true collectors!
  • 1970's Tomy Wonderful Waterful Toys Replacement Rubber Cap This listing is for a new replacement rubber cap / plug for the mid 1970's Tomy Waterful Toys. The replacement cap/plug is an exact copy of an original part and is guaranteed to be a perfect fit. The cap fits perfectly and seals nicely as it is a soft rubber. You can also keep one in the spare compartment underneath, just like the toy originally came with. They are available in WHITE color only. Over time, they will change to a cream color just like the original caps. The black plugs shown were test pieces and are for reference and clarification. Not available anywhere else! There is quite a variety of Waterful Toy games, some of which you will find here. Tic Tac Toe, Ring Toss and many more that provide hours of fun. Some people assume the toy requires two rubber plugs because there is one on the bottom. It is a spare and serves no other purpose, but it never hurts to have two!
  • Peter Porpoise Puzzle Toy by Child Guidance Toys. There are 12 unbreakable, colorful pieces that create a cute porpoise when assembled correctly. Peter Porpoise also floats in water. . The toy is in great shape. The box shows wear and has been taped in spots.
  • Produced by RC2 Collectibles in 2005, the 1971 Dodge Hemi Rod Shop Challenger SS/DA 1:18 scale diecast model car is part of the Supercar Collectibles series of custom, limited edition cars.  This MOPAR diecast model is a true-to-scale replica of one of the cars owned by Gil Kirk's famous Rod Shop. The Rod Shop was a well known Speed Shop in the Columbus Ohio area.  In 1971, Gil Kirk and Jim Thompson got together with Chrysler and formed an all Dodge race team. The scope of the team was considerable, participating in many of the sportsman classes and Pro Stock. The highly-detailed model features an opening doors, trunk, and  hood, steerable front wheels, and a beautifully detailed interior and chassis. The dimensions of the car are approximately L-10.5, W-4, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The car is still in its original packaging. Never displayed and the box only shows minor storage wear. A must have for true collectors!
  • Produced by Ertl Collectibles in 2004, the 1974 Plymouth Duster diecast model car is Issue No. 11 and part of a Limited Edition of 2004. This model is a true-to-scale replica of the "Miss Mighty Mopar" 1974 Plymouth Duster driven by long-time Chrysler racer Judy Lilly.  In 1975, Judy drove this 1974 Plymouth Duster into the winners circle in several major events. She became the first female competitor to win the Gaternationals at Gainesville in Super Stock.  In all, Judy Lilly held 4 national and 5 divisional drag racing titles and she never finished lower than 3rd in the NHRA standings during her 12 years on the circuit. In addition, Judy won driver of the year honors in 3 different years and was one of Mopar's best ever in the quarter mile. This 1974 Plymouth Duster diecast model features opening doors and hood, steerable front wheels, chrome wheels, authentic logos and paint colors and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.5, H-3 inches. The window box dimensions are L-13.5 x W-6.5 x H-6 inches. The model is still in its original packaging. It was never displayed and the box shows minimal wear from storage. A must have for true collectors!
  • 1980's Universe Televiboat ME777 Space Toy. A clean tin litho battery operated toy in good working condition. Made in China.
  • 1990's Vintage Mask Illusions Hand Critters Boxer Dog Puppet with the original tag. Made from latex rubber.
  • Mr. Christmas Ornament Santa's Lighted Animated Tree Top for your Christmas Tree. Made in 1994, this novel ornament is part of the Mr. Christmas Mechanical Collectibles. Plug it in and watch Santa turn and wave his lighted lantern. Quality construction and in good working condition. Removed from the box for testing purposes only. This is new and unused.
  • 2004 Menards Enchanted Forest Collection 72" Standing Santa Figure We purchased this beautiful, 6' tall Old World Santa figure from our local Menards store back in 2004. Santa is extremely lifelike with thick beard, piercing eyes and real glasses! His burgandy/sage hooded robe is full and soft, covering a full length golden inner garment. The body comes in two pieces that need to be assembled; held together by 4 wing nuts and mounted to a sturdy wooden base. We displayed this Santa in our home the first year after purchasing and he has been in climate controlled storage since. I have not been able to locate a finer, LIFE SIZE Santa anywhere in my searches. This particular Santa was only offered by Menards one year and then the item was retired, as is the case with most Menards Enchanted Forest items. This item is large in its original packing box - 44" X 24" X 17" and approximately 40 pounds. Local pick up in Los Alamitos, California is preferred or shipping by freight.
  • This is a wonderful Alps 'Auto Doggie' Mustang convertible battery operated  car, made in Japan. The toy is a 'Bump N' Go multi directional mover. Auto Doggie is in excellent working condition with the original driver and a replacement dog. (The other dog ran away . . .) When the toy is in play, the car moves about the room and the doggie barks and makes a jumping movement in the passenger seat. It's a large toy measuring 14" long and 5" wide. It is in excellent working condition and is always in a glass cabinet on display in my collection.
  • This is a 1960's Alps Battery Powered HOT ROD Custom 'T' Ford with original box with inserts. The toy features Stop and Go action, vibrating action, lighted engine and 'smokey' boiling radiator. Extremely nice piece in excellent original condition.
  • Alps G-AMHK Helicopter w/original box is a battery-operated toy with multiple actions. The helicopter goes forward and reverse using the red buttons on the remote. There is a working light in the two-pilot cockpit. The top rotors and tail rotors work, and the green slide operates the front wheels for the steering feature. The toy measures 14" long and 6" high. This is an extremely authentic miniature version of the real Westland helicopter. The original box is in excellent condition with the exception of one corner split from age. From my personal aircraft collection.
  • Alps Lincoln Futura Replacement Metal Antenna is an exact fitting replica of the original toy deck mounted antenna. This part will fit on all variations of the Alps Futura cars; friction, battery operated and remote control. The replacement antenna mounts to the toy using the same spring shaft configuration and is an easy install. Also available for this toy are the rubber tires and the metal steering wheel. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in tin.
  • Made in Japan. An old family favorite and an excellent Holiday gift! Santa rings his bell to usher in the Christmas spirit!
  • A clear replacement canopy for the K logo/Alps Space Fighter X-Y-105 space toy.</p>
  • Alps Television Spaceman and Revolving Flashing (Door) Robot Replica Ears. These new red ears come as a set to complete your toy.  Simply glue in place with a few drops of super glue.
  • A nice replica Antenna for the Alps Television Spaceman Robot.
  • Alps Television Spaceman Robot Replica Face Shield. This new face shield is an exact copy of the original part and is a perfect fitting replacement that simply snaps into place. The part comes in clear and tinted pink. Contact us with your color choice after you make the purchase.  If your Face Shield is in good shape and you would like to only replace the EARS, we carry those separately.
  • Alps Windup Proud Peacock

    $201.25 IL Sales Tax 8%
    A nice Alps Windup Proud Peacock. The toy is all tin with rubber feet. When the toy is wound, the peacock walks and spreads his fan. He works wonderfully and would be a very nice addition to your tin toy collection.
  • An American National Mack Truck Gas Tank Replacement Cap. The cap was created from a mold taken of the original toy part. It is guaranteed to be a perfect fit.
  • The "AMT ERTL Ala-Kart 1:25 Scale Model Kit" is a finely detailed replica of the Ala-Kart, a legendary custom hot rod designed by George Barris and Richard Peters.
  • Features SS graphics, 454 SS wheels, exclusive interior and detailed 454 cu. in. engine.
  • AMT ERTL Fiber Optic Lighting Kit. Customize any model kit, picture or other project with AMT's fiber optic lighting accessories kit. Complete with everything except batteries. Opened by Uncle and guaranteed complete!
  • AMT ERTL Fireball 500 1:25 Scale Plastic Model Kit SEALED. The SSXR Barracuda as seen in the American International Pictures movie "Fireball 500".
  • Features a detailed interior, Mickey Thompson "Sportsman" tires, and a dual overhead cam "Hemi" engine. The AMT Ertl Pro Street '70 Coronet Super Bee 1/25 Scale Model Kit 6140 is a highly detailed and authentic replica of the classic 1970 Dodge Coronet Super Bee, a car renowned for its power and distinctive style.
  • New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
  • 1929 Buddy L #208 Transportation Company Bus, 100% Original - This is one of the finest, all original, heavy pressed steel toy busses that you will ever see. This Buddy L Transportation Coach is in incredible, 100% original, unrestored condition with the original leather pull cord still attached. At an impressive 30" length, it's one of the largest toy busses ever produced. The toy has minor surface imperfections and there is mild wear to the original aluminum wheels. As this was also considered a 'ride on' style toy, the steerable front wheels were operated by the riding child turning the spare tires on either side of the front cowl. The toy features steerable wheels and both left and right front opening doors. The original paint is time aged but remarkably few chips or imperfections. The original decals are at 90%.  Plated surfaces are tarnished and left unrestored. This is a true museum piece that was acquired from a reputable, world travelled dealer of fine antiquities. There are no disappointments here. Additional photos are available on request and please, only serious inquiries answered. This toy can be purchased through direct contact ONLY and acceptable payment will be by bank draft, direct wire transfer or verified personal check.
  • Anzio Beach Plastic Model Sealed Kit 1968 by Aurora. Complete with 7 Vehicles (4 Tanks, LCT, Raft, Jeep), Bunkers, Ridges, Barricades, Trees, Rocks, Barrels, Boxes, Bales and 50 Combat Troops (American and Axis).
  • Here we have a complete 4-piece replacement Peter Tork Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our Peter Tork figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
  • A replacement red button for the battery-operated sound box. If your Monkeemobile is missing this button, the sound mechanism is very hard to operate. Just a drop of Super Glue will bond the replacement button to the stem. The button is translucent red, just like the original. Many additional parts are available for this toy. Please keep looking at Uncle Al's!
  • Here we have a complete 4-piece replacement Davey Jones Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces like the original. You will receive a figure with the body and arms in MEDIUM BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt to give us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
  • Here we have a complete 4 piece replacement Michael Nesmith Driver Figure for the large scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces, just like the original.  You will receive a figure with the body and arms in LIGHT ORANGE and the head in FLESH TONE, so it closely matches the original. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment. The replacement Michael Nesmith Driver Figure is only available at Uncle Al’s Toys!
  • Asahi Corp. Toys Junior Products, battery operated 1/10 scale Lotus 49 Ford F-1 formula race car, CUSTOM, in excellent working condition.  This is a beautiful car that Asahi SHOULD have made but didn't. The car sports the engine cover and front spoiler from a Gold Leaf car. I painted the front spoiler in the special yellow/green paint scheme and added the large silver wing. This is car #36.

     It has been in my personal collection for several years and displayed in a glass cabinet.,   

    The toy has a few minor playwear imperfections but nothing distressing and is still a superior condition, working example to display.

  • The REPLACEMENT GEAR COVER for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit. It is possible for tiny bubbles to appear in the casting, as shown in the pictures. This was my first cast part and more recent casts have been bubble-free. The gear cover can be installed on the two different engine versions of the Lotus toy. Plated engines used on the wing cars have molded bosses to mount the wing. This version utilizes the tiny mounting pins on the clear gear cover. Engines without plating are for the non-wing cars and the clear gear cover is installed with the pins removed as the engine has no holes for the pins to go into. The pins can be easily trimmed off for a flush fit. Both versions require the cover to be glued on and just a drop of super glue to each pin area is sufficient.
  • A replacement Injection Cover for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit.
  • This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
  • This is a complete set (4PCS), two guitars and two drumsticks for the 1960's Aoshin ASC Monkee Mobile battery operated car. The original parts are so often broken or missing from this toy. These are cast replacements from a mold taken from original components and are a perfect fit. I also have replacement arms, bodies, heads, engine and scoop, voice box buttons and hubcaps for this toy with pictures and pricing to come.
  • A 1960's Aoshin ASC Batmobile battery operated toy Batmobile in excellent working condition. It's a 'Mystery Action', bump n' go style toy that requires two 'D' cell batteries for operation. Batman and Robin figures in the cockpit sit below the slow timed, flashing beacon light. A faster flashing light emits through the rocket tubes and red turbine lens in the rear. An extremely cool Batman collectible in beautiful shape!
  • Astro Spaceman Robot by Ha Ha Toys

    $166.75 IL Sales Tax 8%
    Very nice Ha Ha Toys Astro Spaceman Robot in his original box is ready for action! Ha Ha Toys robots are known for having better quality gear systems than newer versions of this toy and are more sought after because of that. Batteries have been installed and the toy was hand tested for function and then promptly returned to the original packaging. Astro Spaceman Robot walks with swinging arms and his chest 'dash board' lights up.  He works great and looks even greater when functioning! This toy comes in its original box with inserts. It was removed for these photographs only.
  • Austin powers car produced by RC2 in 2003, the Austin Powers Mini Cooper diecast model car is a true-to-scale replica of the car driven by the 60's British Intelligence undercover agent himself. Like any spy worth his weight in love beads, Powers relies on specially equipped vehicles to give him the edge in the battle of good versus evil. The Austin Powers Mini Cooper features posable front wheels and opening doors.  The dimensions of this "shag-a-delic" replica are approximately L-8, W-3.5, and H-3 inches. The window box dimensions are L-13.75 x W-6.25 x H-5.25 inches. The model is still in its original packaging with the original plastic banding still around the car. It was never displayed and the box only shows some minor wear from storage. A must-have for true collectors!
  • <span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts.  My replacements are shown installed on one of my Cadillacs!
  • This is a Bandai 1959 Cadillac tin friction car in excellent original condition.  The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
  • A replacement antenna for the 1960's Sears Exclusive Bandai Area Radiation Tester. Modeled from pictures of an original toy part, the Antenna installs to the toy the just like the original. We have many other parts available for this toy! Sears Exclusive toys are highly sought after and extremely collectible because of their diverse subject matter and outstanding quality.  The Area Radiation Tester made its first and only appearance in the 1961 edition of the Sears Christmas Catalog as a Sears Exclusive toy. A truly unique and futuristic toy, the Area Radiation Tester is an action toy. Featuring Bump N Go movement, alternating flashing red and green light pods and an articulated radar arm that rises from the rear of the toy in a cloud of smoke! Operates on two 'D' cell batteries inserted into the bottom of the toy. To commence the action, simply slide the carefully hidden On/Off switch on the rear of the toy. The toy automatically comes to a full stop when the rising radar dish pops through the bay doors. Truly an amazing sight to view this toy in operation!
  • A replacement Canopy for the Bandai Area Radiation Tester. The pivotal and meticulously crafted component, embodying precision and authenticity to cater to the discerning needs of enthusiasts and collectors seeking to revive the functionality and aesthetics of their cherished vintage radiation testers.
  • This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original.  Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
  • Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
  • Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
  • Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
  • Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
  • This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
  • Beautiful Bandai BMW Isetta friction powered vehicle in excellent original condition. Friction motor is sound and firm as new and the toy features a realistic opening front end to enter the vehicle.
  • A hood ornament replica for the Bandai Lincoln Convertible/Coupe.  The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
  • Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
  • Another wonderful friction car is the Bandai Rolls Royce Silver Cloud Convertible. This beautiful convertible is in excellent, fully working condition. A must have for collectors and enthusiasts alike!
  • Without a doubt, one of the RAREST and coolest space toys ever made. 1960's Bandai Sears Radiation Tester Exclusive Area battery operated toy in nice working condition. This toy was available ONLY through Sears and could be found in their 1961 catalog. It operates on two 'D'cell batteries and features Bump N Go action, opening rear bay doors, a smoky fog emits while the radiation tester unfolds and lifts out of the bay. The arm retracts back into the bay and the doors close and the toy is on it's way again. During the entire cycle, the light pods in the rear flash red and green intermittently and are very bright. This early Japanese tin toy is a highly sought after space toy example and is sure to please. As can be seen in the pictures, the toy is in working condition and shows playwear and no paint touch ups. The battery compartment is very clean. This is a sizable toy stretching 21 inches in length, 5 inches wide and nearly 6 inches tall to the top of the antenna. Uncle Al's Toys is the only maker and provider of replacement parts for this toy. Both toys available here have replacement light pods, large antenna and front sight. Also included but not shown is a wonderful, first quality reproduction box, also available nowhere else! A great old vintage battery operated space toy that makes an outstanding functioning shelf piece display. This is not one to miss!
  • This is a wonderful Bandai Silver Cloud Rolls Royce Hardtop battery operated toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
  • A new replacement seat for the Bandai Silver Pigeon Scooter. Molded and cast from an original seat so the shape and diameter are a perfect fit. The rubber hand grips for this toy are also available.
  • Replica Batman Batcuffs 1966 Ideal Batman Utility Belt Accessory

    Replica Batman Batcuffs for the 1966 Ideal Batman Utility Belt. An accessory for the utility belt worn by Batman in the original 1966 TV series. These batcuffs are an exact replica of the original.
  • Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the  gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features.  The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
  • The BIG CHIEF DELUXE bicycle light is hand painted in brilliant, vibrant multicolor. The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle's axel utilizing the wheel mounting nut, front or rear. The light has a 36" wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. The lights to attach to both original tank bike lighting or dynamo light systems. Future editions of light pairs will be available as LED wireless installation. Coming soon, Uncle Al's Toys will introduce another version of the Big Chief light for your fender.
  • Add a splash of color to your bike with the new BIG CHIEF bicycle accessory light set! The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle/s axel utilizing the wheel mounting nut, front or rear. The light has a 36” wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. These units attach to original tank bike lights or dynamo light systems. Future editions will be available as LED wireless installation. The Big Chief bike light is available in red or blue with more colors to be added soon. It is currently sold in pairs with FREE SHIPPING (lower 48 only). Made in the USA!
  • Buddy L Mechanical Scarab Windup Automobile. A pressed steel toy measuring about 10" long with a wind-up motor on the rear wheels.. Be sure to check out the video. This is a very unique and imaginative toy produced by Buddy L in the mid 1930's. The toy is in very good to excellent operating condition, with original paint and Scarab decals on the doors. The toy shows moderate playwear, with numerous scratches overall but the plated trim is clean. This is an extremely well made and unusual subject, collectible toy. To operate the toy, swing the stop lever to secure the rear wheels from rotating and wind the mechanism. Place the toy on the floor, release the stop lever and watch the Scarab move in a forward direction. As the mechanism continues its cycle, a small wheel drops at the rear of the mechanism causing the Scarab to turn in another direction.
  • Line Mar Calypso Joe the Drummer Mechanical Figurine. A very nice tin litho windup toy with a reproduction box from ToyTent. Joe works perfectly, pounding his drum and rocking back and forth.
  • Vintage 1960's Ohio Art Carnival Shooting Gallery in wonderful complete and working condition. Received as a birthday present when I was a kid, this large and heavy wind up tin toy has ducks on a conveyor belt that slowly pass in front of a circular spinning target. The original elastic belts are still in very good condition and the toy works well. It comes with two original dart guns and two original black shaft darts. An after market package of Ohio Art darts is included as the rubber tips are in good shape. This toy comes in the original box and shows wear and age but displays nicely. Beautiful full color litho gallery in extremely nice condition and rare to find with two original working dart guns/darts!
  • Child Guidance Mechanical Helicopter No. 8200. A child's introduction to mechanics. The gears turn, the motor spins and it makes a realistic sound.  Wind it up and watch it run! The helicopter can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
  • A child's introduction to mechanics. Wind it up and watch it run! The train can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
  • Child Guidance Mechanical Pay Phone No. 8270 new in original plastic box. Complete with coins. A child's introduction to mechanics. Wind it up and watch it run! The pay phone can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
  • Child Guidance Mechanical Robot No. 8260 new in original plastic box. A child's introduction to mechanics. Wind it up and watch it run! The robot can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
  • Child Guidance Mechanical V-8 Engine, No. 8280. A child's introduction to mechanics. Wind it up and watch it run! The engine can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
  • This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.

Go to Top