Product Categories in this Section
-
Here we have a replacement windows for the battery-operated Horikawa Space Station. The replacement windows are vacuum formed of the same thickness clear plastic as the originals for a perfect fit.
-
Duromold Flying Saucer Bank Dome - This listing is for one replacement dome for the Duromold Flying Saucer Bank. This dome is an exact replica of the original part and is guaranteed to be a perfect fit! Just pop it on! The bank in the photographs is for display purposes only and not for sale.
-
This brand new replacement seat for the Doepke Model Toy is created from a mold taken of an original toy part and is guaranteed to fit perfectly. The seat has the same bosses with a drilled hole to accommodate screw on fastening just like original. The seat should be washed with soap and water to remove mold release agent before painting or adhering cloth. This seat is available no where else but here and is in stock.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
Daiya Japan Martian Supersensitive Radar Jeep - These are replacement windshield domes for the Daiya, Martian Supersensitive Radar Jeep. Sold as a set of two for a perfectly matched set and best look.
-
Cragstan Mr. Robot Replacement Eyes. This is a set of replacement eyes for the Cragstan Mr. Robot. These easily glue in place with just a couple drops of super glue.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
-
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
Replica Batman Batcuffs 1966 Ideal Batman Utility Belt Accessory
Replica Batman Batcuffs for the 1966 Ideal Batman Utility Belt. An accessory for the utility belt worn by Batman in the original 1966 TV series. These batcuffs are an exact replica of the original. -
A new replacement seat for the Bandai Silver Pigeon Scooter. Molded and cast from an original seat so the shape and diameter are a perfect fit. The rubber hand grips for this toy are also available.
-
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
-
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
A replacement Canopy for the Bandai Area Radiation Tester. The pivotal and meticulously crafted component, embodying precision and authenticity to cater to the discerning needs of enthusiasts and collectors seeking to revive the functionality and aesthetics of their cherished vintage radiation testers.
-
A replacement antenna for the 1960's Sears Exclusive Bandai Area Radiation Tester. Modeled from pictures of an original toy part, the Antenna installs to the toy the just like the original. We have many other parts available for this toy! Sears Exclusive toys are highly sought after and extremely collectible because of their diverse subject matter and outstanding quality. The Area Radiation Tester made its first and only appearance in the 1961 edition of the Sears Christmas Catalog as a Sears Exclusive toy. A truly unique and futuristic toy, the Area Radiation Tester is an action toy. Featuring Bump N Go movement, alternating flashing red and green light pods and an articulated radar arm that rises from the rear of the toy in a cloud of smoke! Operates on two 'D' cell batteries inserted into the bottom of the toy. To commence the action, simply slide the carefully hidden On/Off switch on the rear of the toy. The toy automatically comes to a full stop when the rising radar dish pops through the bay doors. Truly an amazing sight to view this toy in operation!
-
<span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts. My replacements are shown installed on one of my Cadillacs!
-
This is a complete set (4PCS), two guitars and two drumsticks for the 1960's Aoshin ASC Monkee Mobile battery operated car. The original parts are so often broken or missing from this toy. These are cast replacements from a mold taken from original components and are a perfect fit. I also have replacement arms, bodies, heads, engine and scoop, voice box buttons and hubcaps for this toy with pictures and pricing to come.
-
This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
-
A replacement Injection Cover for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit.
-
The REPLACEMENT GEAR COVER for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit. It is possible for tiny bubbles to appear in the casting, as shown in the pictures. This was my first cast part and more recent casts have been bubble-free. The gear cover can be installed on the two different engine versions of the Lotus toy. Plated engines used on the wing cars have molded bosses to mount the wing. This version utilizes the tiny mounting pins on the clear gear cover. Engines without plating are for the non-wing cars and the clear gear cover is installed with the pins removed as the engine has no holes for the pins to go into. The pins can be easily trimmed off for a flush fit. Both versions require the cover to be glued on and just a drop of super glue to each pin area is sufficient.
-
Here we have a complete 4 piece replacement Michael Nesmith Driver Figure for the large scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT ORANGE and the head in FLESH TONE, so it closely matches the original. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment. The replacement Michael Nesmith Driver Figure is only available at Uncle Al’s Toys!
-
Here we have a complete 4-piece replacement Davey Jones Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces like the original. You will receive a figure with the body and arms in MEDIUM BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt to give us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
-
A replacement red button for the battery-operated sound box. If your Monkeemobile is missing this button, the sound mechanism is very hard to operate. Just a drop of Super Glue will bond the replacement button to the stem. The button is translucent red, just like the original. Many additional parts are available for this toy. Please keep looking at Uncle Al's!
-
Here we have a complete 4-piece replacement Peter Tork Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our Peter Tork figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
An American National Mack Truck Gas Tank Replacement Cap. The cap was created from a mold taken of the original toy part. It is guaranteed to be a perfect fit.
-
Alps Television Spaceman Robot Replica Face Shield. This new face shield is an exact copy of the original part and is a perfect fitting replacement that simply snaps into place. The part comes in clear and tinted pink. Contact us with your color choice after you make the purchase. If your Face Shield is in good shape and you would like to only replace the EARS, we carry those separately.
-
A nice replica Antenna for the Alps Television Spaceman Robot.
