Product Categories in this Section
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
A new cockpit/canopy set for the Hubley Kiddie Toy Fighter Bomber and P-47 die cast metal airplanes. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
Here we have a replacement windows for the battery-operated Horikawa Space Station. The replacement windows are vacuum formed of the same thickness clear plastic as the originals for a perfect fit.
-
Duromold Flying Saucer Bank Dome - This listing is for one replacement dome for the Duromold Flying Saucer Bank. This dome is an exact replica of the original part and is guaranteed to be a perfect fit! Just pop it on! The bank in the photographs is for display purposes only and not for sale.
-
This brand new replacement seat for the Doepke Model Toy is created from a mold taken of an original toy part and is guaranteed to fit perfectly. The seat has the same bosses with a drilled hole to accommodate screw on fastening just like original. The seat should be washed with soap and water to remove mold release agent before painting or adhering cloth. This seat is available no where else but here and is in stock.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
Daiya Japan Martian Supersensitive Radar Jeep - These are replacement windshield domes for the Daiya, Martian Supersensitive Radar Jeep. Sold as a set of two for a perfectly matched set and best look.
-
Cragstan Mr. Robot Replacement Eyes. This is a set of replacement eyes for the Cragstan Mr. Robot. These easily glue in place with just a couple drops of super glue.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
-
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
Replica Batman Batcuffs 1966 Ideal Batman Utility Belt Accessory
Replica Batman Batcuffs for the 1966 Ideal Batman Utility Belt. An accessory for the utility belt worn by Batman in the original 1966 TV series. These batcuffs are an exact replica of the original.
