Product Categories in this Section
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Masudaya battery operated Queen of the Sea replica radar antenna. Available ONLY through Uncle Al's Toys is this plastic resin replica antenna available in light blue, dark blue and white. (Please specify color when ordering.)The antenna mounts on a rod protruding from the upper deck of the toy and is nearly always lost. Also available for the Queen is a replica tin flag and the clear light bulb domes for the upper deck! Time to complete your large cruise ship and increase it's value!
-
This is a set of SIX wooden bullets for the 1950's Marx Rex Mars Planet Patrol Space Target Game. These painted gold wooden bullets are made exactly like the originals and will fire out of your toy if you desire to do so. The bullets are perfect to complete your vintage toy.
-
Only available through Uncle Al's Toys is the 100% complete and brand new remote control for the Marx Hi-Bouncer Moon Scout Robot toy. All parts are created exactly like the original and these are made to order and take about 2 weeks to complete. Please note that my pictures show my replacement in a different color than the original light blue. This is only to show you that this is for real! Your remote will be molded in the same light blue as original and orientation of colored control buttons will also be the same as original. As far as I know, Hi- Bouncer is the only toy to ever use this style remote, making it an absolute must have to complete your robot to original condition. Just add your own wire and you're ready to go!
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
-
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
