Vintage Bandai Toys and Toy Parts | Uncle Al’s Toys
At Uncle Al’s Toys, we take pride in offering a delightful collection of vintage Bandai toys for avid toy collectors. Our specialized services include meticulous restoration and repairs for antique tin and pressed steel Bandai toys, ensuring they retain their original charm and functionality. Whether you’re searching for rare Bandai collectibles or looking to add to your vintage toy collection, Uncle Al’s Toys is your one-stop destination. Explore our unique selection and experience the nostalgia of these cherished Bandai treasures from the past.
-
<span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts. My replacements are shown installed on one of my Cadillacs!
-
This is a Bandai 1959 Cadillac tin friction car in excellent original condition. The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
-
A replacement antenna for the 1960's Sears Exclusive Bandai Area Radiation Tester. Modeled from pictures of an original toy part, the Antenna installs to the toy the just like the original. We have many other parts available for this toy! Sears Exclusive toys are highly sought after and extremely collectible because of their diverse subject matter and outstanding quality. The Area Radiation Tester made its first and only appearance in the 1961 edition of the Sears Christmas Catalog as a Sears Exclusive toy. A truly unique and futuristic toy, the Area Radiation Tester is an action toy. Featuring Bump N Go movement, alternating flashing red and green light pods and an articulated radar arm that rises from the rear of the toy in a cloud of smoke! Operates on two 'D' cell batteries inserted into the bottom of the toy. To commence the action, simply slide the carefully hidden On/Off switch on the rear of the toy. The toy automatically comes to a full stop when the rising radar dish pops through the bay doors. Truly an amazing sight to view this toy in operation!
-
A replacement Canopy for the Bandai Area Radiation Tester. The pivotal and meticulously crafted component, embodying precision and authenticity to cater to the discerning needs of enthusiasts and collectors seeking to revive the functionality and aesthetics of their cherished vintage radiation testers.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
Beautiful Bandai BMW Isetta friction powered vehicle in excellent original condition. Friction motor is sound and firm as new and the toy features a realistic opening front end to enter the vehicle.
-
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
