-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
-
Another one of my personal favorites is this fabulous TN/Nomura/Baravelli Sonic Car Dodge Charger in 100% original condition and in the original box with insert foam blocks. The Sonic whistle has never been removed from it's plastic bag. Each blow of the whistle commands the car to perform a different function, forward, reverse, left and right and finally for the machine guns to propel out of the roof of the car with bright flashing muzzle fire! Unique and again, a large 15" long by 6" wide and 5" tall. There is slight oxidation on the brightwork trim of the car but overall is just stunning! Operates on 2 'D' cell and 1 9volt battery.
-
Another NEW part from Uncle Al's Toys and available NO WHERE ELSE is this great replacement lens for the Marx or Halco flashlight pistols, Marx Space Patrol Atomic Flashlight Pistol, Halco Planet Patrol Flashlight Pistol and Rex Mars Planet Patrol Flashlight Pistol. Beautifully clear lens screws on just like the original and can be made in slightly tinted colors upon request. Uncle Al is also a specialist in repairing broken plastic ray guns!
-
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
This listing is for a reproduction of an early German (1953 - 1970) dash mounted mileage counter. These were quite often used with early Volkswagens and other European vehicles that didn't have gas gauges. I make these from a mold taken from an original disassembled counter. The original counter had a white counter shroud with black base and number wheels featuring white numbers.
-
Marx Electra II Propeller, Square Tip, Replacement Plastic NEW flexible plastic propellers for the Marx Electra II aircraft toys are the perfect solution to those old broken or glue covered propellers. These new props are a bit more flexible than the originals propellers. It installs easily.
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
Replacement hubcap for the 1950's Yonezawa Atom Jet Racer. This hubcap is an exact copy of the originals. The hubcap is nickel plated and the Atom script is hand painted.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC