-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
flexible, plastic propeller for the battery-operated Cragstan or Yonezawa DC-7 aircraft toy. Created from a mold of an original toy part to guarantee a perfect fit. The replacement prop is a bit more flexible than the original material. The wings must be disassembled in order to correctly install the propeller. Parts are available for other versions of the DC-7. The square tip propeller, the translucent red beacon lenses, white radar antennas and the translucent red engine covers.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
This is a replacement head for the 1939 Ideal Novelty and Toy Company, Superman composition toy/doll figure. This is the first known Superman toy and they are extremely rare and in high demand. This replacement head was created from a mold made of an original head. This resin cast replacement comes with a metal loop inside, just as original, so that it will accept the spring and metal hook that comprise the flexible joints of the legs. Please allow 14 days from the time of ordering and purchase as these are made to order.
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
Here we have a complete 4-piece replacement Davey Jones Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces like the original. You will receive a figure with the body and arms in MEDIUM BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt to give us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
-
Here we have a complete 4-piece replacement Peter Tork Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our Peter Tork figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC