-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Here we have a Convertible Replacement Windshield for the Marx Dick Tracy squad car. This is a brand-new replacement windshield for the 1950's 20" tin Marx Dick Tracy squad, Marx Army Command and Fire Chief friction drive cars. The windshield is created from a mold taken of an original 6 PIN windshield. This windshield will also fit the 4 PIN vehicles simply by removing the second pins from the ends. The convertible replacement windshield is fitted to a tin vehicle during the curing process for a guaranteed excellent fit!
-
A new replacement RED LENS for the large 20" Marx friction cars with Electric Siren lights. The lens will fit the Marx Dick Tracy Squad Car, the Army Command Car and the Fire Chief Car. This lens is an exact copy of the original and is made to function exactly the same.
-
A replacement gun tip for the 1950's Marx Captain Space Solar Scout Rifle. We create parts from a mold taken of an original toy part cast in urethane. It is as close to an injection molded original toy part as you can get. It is NOT a 3D printed part! The gun tip simply slides on to the end of your rifle. Install the screw and nut (not included) and you're done. The replacement tip is available in three Marx colors; red, green and blue. We test fit each part and guarantee the part to be a perfect fit.
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
A replacement windshield for the Marx Mechanical Roaster and Marx Disney Parade wind-up cars. Created from a mold taken of an original toy part and guaranteed to fit exactly like the original. The Marx Roadster wind-up vehicles are identified by their lithographed license plates 'D-6581' and are technically called the Mechanical Roadster. They have solid rubber wheels and a clockwork spring motor. The Marx Disney Parade Roadsters are covered in colorful lithographed images of various Disney characters. Both versions of this toy share the common clear plastic windshield and steering wheel. These vehicles were first introduced around 1950.
-
Only available through Uncle Al's Toys is the 100% complete and brand new remote control for the Marx Hi-Bouncer Moon Scout Robot toy. All parts are created exactly like the original and these are made to order and take about 2 weeks to complete. Please note that my pictures show my replacement in a different color than the original light blue. This is only to show you that this is for real! Your remote will be molded in the same light blue as original and orientation of colored control buttons will also be the same as original. As far as I know, Hi- Bouncer is the only toy to ever use this style remote, making it an absolute must have to complete your robot to original condition. Just add your own wire and you're ready to go!
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
Hootin Hollow Haunted House Button is a perfect reproduction of the original toy part. If your haunted house is missing any of the little buttons for operating the different house functions, your prayers are answered! We carefully color match our plastic to blend in our new buttons with your existing toy buttons. Marx Hootin Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a skeleton that jumps out of the chimney, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features operate by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the jumping skeleton, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Hootin’ Hollow Haunted House Skeleton is a perfect reproduction of the original toy part. If your haunted house is missing the skeleton that’s jumping out of the chimney, your prayers are answered! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
A new replacement small driver for the Marx Race Cars requiring a smaller driver with a single mounting pin. The part is cast in the white color as shown. Please see my other listing offering the dual mounting pin driver. It is a bit larger and fits the larger race cars and roadsters. These replacement drivers are the nicest available and fit perfectly just as the originals.
-
Replacement Switch - This versatile little switch will fit several toys - the Marx Super Beam Signal Ray Gun, the Marx Space Patrol Atomic Flashlight Pistol, the Rex Mars Planet Patrol Ray Gun and even the Halco Space Patrol Ray Gun. The switch generally matches the triggers so we have it available in many colors. Just specify the color when you make the purchase.
-
Masudaya 'Queen Of The Sea' battery operated ocean liner in excellent working original condition. The Queen requires 3 'D' cell batteries for operation and features Bump N Go action, loud ships horn, red and green flashing lights and spinning radar antenna. The antenna and metal ship's flag are Uncle Al's reproductions. There is some very minor rust damage near the battery compartment but not inside. Awesome toy nearly 24" long.
-
Masudaya battery operated Queen of the Sea replica radar antenna. Available ONLY through Uncle Al's Toys is this plastic resin replica antenna available in light blue, dark blue and white. (Please specify color when ordering.)The antenna mounts on a rod protruding from the upper deck of the toy and is nearly always lost. Also available for the Queen is a replica tin flag and the clear light bulb domes for the upper deck! Time to complete your large cruise ship and increase it's value!
-
Masudaya Queen of the Sea Replacement Light Domes, Set of TWO - This listing is for a set of TWO replacement light bulb covers for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. These covers are and exact replica of the original toy parts and are guaranteed a perfect fit - just pop them on! Other parts are available for this toy such as the light blue radar antenna and the always missing rear tin flag. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
This listing is for a replica tin flag for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. This tin flag is a nearly exact replica of the original, almost always missing tin flag that fits to the rear of the ocean liner. A shoulder is machined onto the shaft so the flag sits and fits at the appropriate height. Other parts are available for this toy such as the light blue radar antenna and the set of two clear dome light bulb covers. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
Reproduction Whistle for the Masudaya Sonicon Rocket. With a blow of the whistle, you control the direction of the rocket. Guaranteed to perform just like the original whistle!
-
A replacement Red Lens for the Masudaya Space Capsule 6.
-
Beautiful vintage 1950's Japan Masudaya 'Space Giant' flying saucer battery operated toy in tremendous condition. This large (12") diameter toy requires 3 'D' cell batteries and features Bump n' Go action, eerie whistling sound and flashing alternating lights on the deck as well as tail fins. A very nice, rare collectible spaceship!
-
A replacement Amber Canopy for the A.L. Maxey Challenger Jr. race car. Created from a mold taken of an original part to ensure an accurate fit.
-
Alps Lincoln Futura Metal Steering Wheel is an exact fitting replica of the original toy steering wheel. This part will fit all variations of the Alps Futura cars; friction, battery operated, and remote control. The replacement wheel mounts to the toy using the same tab/slot configuration and is easy to install. Also available for this toy are the rubber tires and the spring shaft deck antenna. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in the tin.
-
A replacement Red Canopy for the Nomura 3 Stage Rocket. Created from a mold taken of the original toy part and is guaranteed to be a perfect fit.
-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
This listing is for a new replacement engine cover for the Nomura R-10 VW Space Patrol Car or for the Nomura Piston Tractor. This clear engine cover may have been used on other Nomura toys that I'm unaware of. The part was created from a mold taken of an original toy part and is guaranteed a perfect fit and crystal clear. The toys pictured are used to clarify the part in this listing and are NOT INCLUDED or for sale.
-
A replacement contact set for the Nomura Radar Robot Battery Box. The contact set includes the new brass contacts and mounting boards as shown. The Nomura Radar Robot face controller is not included. If your controller is still in good condition but the contacts are either broken or damaged from leaking batteries, this is your cure! These are made from the same materials and thicknesses as the originals and are guaranteed to be a perfect fit. No one else makes these and Uncle Al can re-create contacts and mounting boards for ANY vintage battery toy!
-
&amp;amp;lt;span style="font-size: large;">A replacement Battery Cover Latch for the Nomura Robby Space Patrol/Moon Patrol. The latch attaches <span class="yoast-text-mark">class="yoast-text-mark">e="font-size: large;">to your existing battery cover door. This latch can be used on Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship.
-
Pyro X-300 Space Cruiser rocket ship clear replacement nose cone, crystal clear and easily snaps in place like the original. Other parts are available for this toy as well as the Pyro X-400.
-
This is a replacement ASTRONAUT PILOT FIGURE that fits in both the Pyro X-300 and X-400 rocket spaceships from the 1950's. The figure has a little button on the bottom that fits into the mounting hole of the toy. It is glued into place as original. You may have to remove old plastic from the mount hole to secure properly. The X-300 require one figure while the X-400 requires two figures.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC