-
A replacement Race Car Driver for the Marx Mechanical Roadster and Indy race car offered in yellow or white. Please contact me to let me know your color selection. This is a near perfect replacement toy part made from a mold taken from an original part. It will install just like the original with no disappointments! These items are in stock and ready to ship. Looking for a great Marx car?
-
Yanoman Space Scout S-17 Space Toy replacement metal antenna.
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
This is a replacement ASTRONAUT PILOT FIGURE that fits in both the Pyro X-300 and X-400 rocket spaceships from the 1950's. The figure has a little button on the bottom that fits into the mounting hole of the toy. It is glued into place as original. You may have to remove old plastic from the mount hole to secure properly. The X-300 require one figure while the X-400 requires two figures.
-
Yonezawa Cragstan DC-7, Automatic Multi-Action Prop-Jet Plane, replacement ANTENNA, fits the large scale battery operated prop planes by Yonezawa, American Airlines DC-7, United Airlines DC-7, TWA Airlines DC-7, Northwest Airlines DC-7, Eastern Airlines DC-7. This high quality replacement part is created from a mold of an original toy part to ensure the greatest accuracy. A drop of super glue will hold it in place and is guaranteed to be a perfect fit! As this toy was manufactured with many different features and airline names, we offer a wide variety of additional replacement parts. Common to all the planes is the red beacon lens listed separately here in the toy parts category. Also available are the white propellers ( round tip and square tip), and red nacelle engine covers.
-
Tippco 1930's Mercedes Fuhrerwagen Staff Car Replacement Hood Ornament created from an original piece and made of cast metal. Installs just like the as original.
-
Pyro X-300 Space Cruiser rocket ship clear replacement nose cone, crystal clear and easily snaps in place like the original. Other parts are available for this toy as well as the Pyro X-400.
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Pyro X-400 Space Explorer Replacement Canopy for the 1960's Pyro X-400 Space Explorer plastic spaceship. Created from a mold taken of an original toy part to ensure the utmost accuracy in the snap-fit installation, just like the original.
-
Just like the original, this fin is faithfully recreated in tin. To make each half of the fin shape, custom stamping dies were created from an original Atom Jet fin. The halves are hand-assembled, and each new fin is then pre-fitted to an original toy ensuring accuracy and a perfect fit. We complete the fin with paint colors matching as close as possible to the original colors. The results are undeniable and sure to please. Installation is a breeze because the fin snaps easily into place like the original. *WE MAKE EACH FIN TO ORDER, SO PLEASE ALLOW EIGHT WEEKS FOR COMPLETION.*
-
An American National Mack Truck Gas Tank Replacement Cap. The cap was created from a mold taken of the original toy part. It is guaranteed to be a perfect fit.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
A replacement gun tip for the 1950's Marx Captain Space Solar Scout Rifle. We create parts from a mold taken of an original toy part cast in urethane. It is as close to an injection molded original toy part as you can get. It is NOT a 3D printed part! The gun tip simply slides on to the end of your rifle. Install the screw and nut (not included) and you're done. The replacement tip is available in three Marx colors; red, green and blue. We test fit each part and guarantee the part to be a perfect fit.
-
A new replacement RED LENS for the large 20" Marx friction cars with Electric Siren lights. The lens will fit the Marx Dick Tracy Squad Car, the Army Command Car and the Fire Chief Car. This lens is an exact copy of the original and is made to function exactly the same.
-
A replacement Red Lens for the Masudaya Space Capsule 6.
-
A replacement tail fin for the Yoshiya SS Space Friction Rocket. It installs just as the original. The Replacement Tail Fin is a specific component designed for the restoration or repair of the Rocket toy.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Alps Lincoln Futura Replacement Metal Antenna is an exact fitting replica of the original toy deck mounted antenna. This part will fit on all variations of the Alps Futura cars; friction, battery operated and remote control. The replacement antenna mounts to the toy using the same spring shaft configuration and is an easy install. Also available for this toy are the rubber tires and the metal steering wheel. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in tin.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
New from Uncle Al's Toys is this excellent replacement missile for the 1960's Mattel Lost in Space Roto Jet Gun. This round, flying missile was created by making a mold of an original toy part. The two part mold captures all of the fine details of the missile for the best and ONLY current reproduction of this part. Be sure to view all of the attached pictures showing the flying missile in action! If your Roto Jet Gun is still working and in need of projectiles, your search is over. These parts are in stock and ready to ship. Danger Will Robinson!! The Roto Jet Gun was a wildly popular toy from the mid 1960's and coincided with the equally popular TV series, 'Lost In Space'. The box packaging for the toy featured the likeness of child star Billy Mumy in his space suit firing his Roto Jet Gun. It also listed all of the accessory pieces and different gun configurations. A boxed version of this toy sold on eBay in 2019 for just over $2900.00! The Roto Jet Gun shown in the pictures is for toy clarification only and is not currently available. This sale is for ONE missile only.
-
This is a brand new replacement windshield/convertible top for the 1950's 20" tin Marx Falcon friction drive car. The top comes clear and ready for painting in your favorite color. This new top was created from a mold made from the black top in the pictures. As you can see, it's a perfect fit and the glass is clear. The mounting pins are about 1/4" long. A perfect replacement for that cracked, warped or missing top.
-
Produced by Ertl Collectibles in 1996, the 1969 Dodge Daytona Charger 1:18 scale diecast model car is part of the American Muscle series Collector's edition. The 426 Hemi MOPAR diecast model features true-to-scale details. Opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.25, H-3 inches. The model is still in its original packaging and the box shows minimal storage wear. A must have for true collectors!
-
This listing is for a replica tin flag for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. This tin flag is a nearly exact replica of the original, almost always missing tin flag that fits to the rear of the ocean liner. A shoulder is machined onto the shaft so the flag sits and fits at the appropriate height. Other parts are available for this toy such as the light blue radar antenna and the set of two clear dome light bulb covers. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC