-
Tippco 1930's Mercedes Fuhrerwagen Staff Car Replacement Hood Ornament created from an original piece and made of cast metal. Installs just like the as original.
-
TN Nomura Astronaut Helmet. A replacement astronaut helmet for the battery-operated Nomura Moon Patrol Space Division #3 or the Mobile Space TV Unit with Trailer. Created from a mold taken of the original toy part to guarantee a perfect fit. The helmet includes both a red and yellow cone. The red cone is correct for the Mobile Space TV Unit with Trailer and the yellow cone is correct for the Nomura Moon Patrol.
-
Rare, TN Toys Frankenstein Hand Mechanical Bank Wind-Up made in Japan. Wind the key and watch Frankenstein's hand come out of the house and grab the coin. This bank comes with the even rarer original box. Newer versions of this bank are called 'Mystery Bank'. Frankenstein Hand Mechanical Bank is in excellent working, original condition.
-
Another one of my personal favorites is this fabulous TN/Nomura/Baravelli Sonic Car Dodge Charger in 100% original condition and in the original box with insert foam blocks. The Sonic whistle has never been removed from it's plastic bag. Each blow of the whistle commands the car to perform a different function, forward, reverse, left and right and finally for the machine guns to propel out of the roof of the car with bright flashing muzzle fire! Unique and again, a large 15" long by 6" wide and 5" tall. There is slight oxidation on the brightwork trim of the car but overall is just stunning! Operates on 2 'D' cell and 1 9volt battery.
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
A new replacement round rubber cap/plug for the mid 1970's Tomy WEE Waterful and Two Player water games. The replacement cap/plug is an exact copy of an original part and is guaranteed to be a perfect fit. The cap fits perfectly and seals nicely as it is a soft rubber. You can also keep one in the spare compartment underneath, just like the toy originally came with. They are available in WHITE color only. Over time, they will change to a cream color just like the original caps.
-
Out of stockA vintage Pango Pango African Dancer Mechanical Windup Toy with a reproduction box. Bright tin litho toy in excellent working condition. Made in Japan by T.P.S..
-
Out of stockThis listing is for a reproduction of an early German (1953 - 1970) dash mounted mileage counter. These were quite often used with early Volkswagens and other European vehicles that didn't have gas gauges. I make these from a mold taken from an original disassembled counter. The original counter had a white counter shroud with black base and number wheels featuring white numbers.
-
Out of stockThis is The Old Timer wind-up 24-hour clock novelty from Poynter Products. It is rare and comes complete with winding key, pendulum and box.
-
Vintage Marx Battery Operated Lighted Gas Pump Island in excellent original, working condition.
-
Out of stockA wonderful 1950s wind-up key mechanical tricycle riding Santa Claus toy. There is a balloon on the back of the bell and a Merry Christmas flag. Wind up the toy and watch Santa ride in a circular motion while the bell rings.
-
The Toy Masters Space Survey Jeep friction toy sometimes comes with a tin astronaut driver, but always has a telescope that swings back and forth. A shaft protrudes vertically through the rear of the telescope and the antenna will rotate 360 degrees when mounted atop that shaft. Uncle Al's also fabricates the replacement telescope and cradle assembly for this toy.
-
This listing is for one replacement tin flag for the Wolverine Carousel. The tin flag removes easily from Wolverine Carousel, which is why you often find one or more missing from the toy. The toy in the photographs is for display purposes only and not for sale.
-
This is a brand new replacement windshield/convertible top for the 1950's 20" tin Marx Falcon friction drive car. The top comes clear and ready for painting in your favorite color. This new top was created from a mold made from the black top in the pictures. As you can see, it's a perfect fit and the glass is clear. The mounting pins are about 1/4" long. A perfect replacement for that cracked, warped or missing top.
-
Perfect fit replacement rubber parts just like original! The rubber nose cone is cast to fit tightly but in the same contour of the rocket tip. The rubber fin tips just pop in. You may need to poke the old rubber bases out of the way to fit the base of the new tips into the holes. Make your XM-12 Moon Rocket a real show stopper again with these great replacement rubber parts. They are made of the same grade material as the original parts and can be installed without taking your toy apart. Also available for this toy are the crystal clear canopy. 'On/Off' ball switch and rocket engine celluloid windows.
-
XM-12 Moon Rocket - Yonezawa - Replacement Cockpit Canopy - Perfect fit replacement, orange color molded just like original! You get one switch ball exactly as shown. The ball can be glued onto the switch with super glue to hold it fast. Our switch ball was created from a mold taken of an excellent condition original part in order to provide you the finest nearly exact copy available. We also offer other parts for this toy and are experts in it's repair and restoration. We will be offering replacement snap on tin fins and the twist on rear plated exhaust with light in the very near future!
-
New in the box. This miniature collectible is an exact replica of a 1950'S Bullet Car. It measures approximately 6-3/4” long and has rotating wheels and authentic detailing. This collectible is number 06612 of a 15,000 piece edition and includes a certificate of authenticity. Release date: 1998
-
Yanoman Space Scout S-17 Space Toy replacement metal antenna.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
-
Replacement set of cone shaped tail lights for the 1950's Yonezawa Atom Jet 30" Racer. Tail lights are sold in a set of 3 so that they will all be the same color when installed. The toy has to be opened up in order to properly install the lights. These parts are an exact copy of the originals, including the molded internal threads. I also have these cones in GRAY as they are used with the cowl lights on this toy. I have these parts with male external threads as well as the female threads shown. These parts are in stock and ready to go. The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
Replacement hubcap for the 1950's Yonezawa Atom Jet Racer. This hubcap is an exact copy of the originals. The hubcap is nickel plated and the Atom script is hand painted.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
Replacement tires for the 1950's Yonezawa Atom Jet Racer. Tires are an exact copy of the originals.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC