-
Perfect fit replacement rubber parts just like original! The rubber nose cone is cast to fit tightly but in the same contour of the rocket tip. The rubber fin tips just pop in. You may need to poke the old rubber bases out of the way to fit the base of the new tips into the holes. Make your XM-12 Moon Rocket a real show stopper again with these great replacement rubber parts. They are made of the same grade material as the original parts and can be installed without taking your toy apart. Also available for this toy are the crystal clear canopy. 'On/Off' ball switch and rocket engine celluloid windows.
-
Linemar 1956 Lincoln Continental TIN Hood Ornament / Antenna Set
A Linemar 1956 Lincoln Continental TIN Hood Ornament / Antenna Set cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery. -
Replacement Knockoff Spinner for Exclusive Sears Indy 500 Turnpike Racers
Replacement Knockoff Spinner for the Exclusive Sears Indy 500 Turnpike Racers - This listing is for new, white metal reproduction knockoff spinners for the Sears Exclusive battery operated Indianapolis 500 Race Car or the Sears Turnpike Line friction racer and the Sears Indy 500 friction racer. These three toys utilize the same master cast spinner but have different threaded diameters. The battery operated spinner has a smaller diameter hole than the friction cars so PLEASE SPECIFY which spinner you need when you purchase. The white metal castings are a bit softer and the wings are a bit thicker than the originals but as you can see, they look and work great. Holes come drilled and tapped so all you have to do is put them on your cars. Please also note that these are fabricated to mount on original car threaded studs. If someone has broken the original studs and replaced with an aftermarket screw, these will not work. When viewing the pictures, the white Indy 500 car is sporting the new knockoffs. The green Turnpike racer has original cast spinners. Note the larger mounting stud of the Turnpike car. These parts are in stock and ready to go. -
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
A replacement antenna for the 1960's Sears Exclusive Bandai Area Radiation Tester. Modeled from pictures of an original toy part, the Antenna installs to the toy the just like the original. We have many other parts available for this toy! Sears Exclusive toys are highly sought after and extremely collectible because of their diverse subject matter and outstanding quality. The Area Radiation Tester made its first and only appearance in the 1961 edition of the Sears Christmas Catalog as a Sears Exclusive toy. A truly unique and futuristic toy, the Area Radiation Tester is an action toy. Featuring Bump N Go movement, alternating flashing red and green light pods and an articulated radar arm that rises from the rear of the toy in a cloud of smoke! Operates on two 'D' cell batteries inserted into the bottom of the toy. To commence the action, simply slide the carefully hidden On/Off switch on the rear of the toy. The toy automatically comes to a full stop when the rising radar dish pops through the bay doors. Truly an amazing sight to view this toy in operation!
-
This is a wonderful Alps Auto Doggie Mustang Convertible Battery Operated Tin Car, made in Japan. The toy is a 'Bump N' Go multi directional mover. Auto Doggie is in excellent working condition with the original driver and a replacement dog. (The other dog ran away . . .) When the toy is in play, the car moves about the room and the doggie barks and makes a jumping movement in the passenger seat. It's a large toy measuring 14" long and 5" wide. It is in excellent working condition and is always in a glass cabinet on display in my collection.
-
Marusan Cadillac Replacement Battery Cover
This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part! -
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
Nomura Robby Space Patrol/Moon Patrol Replacement Battery Cover
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon. -
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Out of stockThis is a brand new exact reproduction of the Pyro X-300 Space Cruiser manufactured by Uncle Al's Toys. A complete original toy was disassembled and molds were made of the individual pieces. As with the original, it features rolling wheels and an astronaut figure. These spaceships can be made in any color combination and more will be available here and on Ebay. The Pyro X-300 Space Cruiser is a beautiful, classic 1950's design that has withstood the test of time in it's popularity. Many different companies across the globe have taken this rocket and added there own design elements. Kleeware and Tudor Rose are two companies that offered this toy in color varieties. T. Cohn offered the rocket with their tin Space Port that would launch the rocket out of the garage and across the floor. Values continue to climb on original toys, making them somewhat unaffordable to new collectors which is why I decided to recreate the toy for those collectors. I will be making other X-300 variations myself with features such as battery operated lighting and friction/sparking drive.
-
Out of stockMasudaya battery operated Queen of the Sea replica radar antenna. Available ONLY through Uncle Al's Toys is this plastic resin replica antenna available in light blue, dark blue and white. (Please specify color when ordering.)The antenna mounts on a rod protruding from the upper deck of the toy and is nearly always lost. Also available for the Queen is a replica tin flag and the clear light bulb domes for the upper deck! Time to complete your large cruise ship and increase it's value!
-
This is a set of SIX wooden bullets for the 1950's Marx Rex Mars Planet Patrol Space Target Game. These painted gold wooden bullets are made exactly like the originals and will fire out of your toy if you desire to do so. The bullets are perfect to complete your vintage toy.
-
Only available through Uncle Al's Toys is the 100% complete and brand new remote control for the Marx Hi Bouncer Moon Scout Replacement Remote Control Robot toy. All parts are created exactly like the original and these are made to order and take about 2 weeks to complete. Please note that my pictures show my replacement in a different color than the original light blue. This is only to show you that this is for real! Your remote will be molded in the same light blue as original and orientation of colored control buttons will also be the same as original. As far as I know, Hi- Bouncer is the only toy to ever use this style remote, making it an absolute must have to complete your robot to original condition. Just add your own wire and you're ready to go!
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Out of stockMade exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
Bandai Rolls Royce Hood Ornament Replica
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go! -
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
-
Available ONLY through Uncle Al's Toys is this ALL TIN replica robot driver head for the rare 'Y' Company Space Patrol Car. This head was created from photographs of the auction car from the Griffith's Auction of 2000. Only two tabs held the original head to the toy, which is probably why so many heads were lost. Also available for this car are replacement hub caps and tinted windshield!
-
Tamiya Honda CB 750 FOUR motorcycle 1/6 scale, kit #BS 0601*1998. This kit is 100% complete unbuilt/unstarted and has been fully inventoried by me. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for Honda and classic bike collectors!
-
Out of stockTamiya Harley-Davison FLH Classic with Sidecar 1/6 Scale, kit #16018. This kit is 100% complete unbuilt/unstarted and was opened only by me since new. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for Harley collectors!
-
Tamiya Harley Davidson FLH Classic BlackFlash 1/6 Scale, kit #16007. This kit is 100% complete unbuilt/unstarted and unopened. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for Harley collectors!
-
Tamiya Harley-Davidson FLH 1200 Police Bike motorcycle 1/6 Scale, kit #16016. This kit is 100% complete unbuilt/unstarted and unopened. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for Harley collectors!
-
Tamiya BMW R75 1/6 Scale, kit #BS0605. This is a vintage kit from the late 1970's and issued through Model Rectifier Corporation. This kit is 100% complete unbuilt/unstarted and unopened. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for BMW and big scale collectors!
-
Absolutely stunning 1950's Marx Wells Fargo / Concord Stage Coach model kit in pristine, 100% completely MINT condition. This is an extremely rare kit with fabulous box art and tremendous detail. If you are familiar with the newer Lindberg versions of this same stage coach kit, you know how large and impressive the final display is. Comes complete with four horse team, all of the necessary tack and chain material as well as five scale figures (approx. 4 1/2" tall on average) The kit, when assembled is over 24" long.
-
Absolutely dead MINT 1950's Marx 30" Chris Craft Constellation Motor Yacht. This very collectible kit is 100% complete and comes with the highly sought after 'Bathing Beauties' (two figures) and the seated ship's captain in the original Marx paper bag.
-
Out of stockThis is the Metaluna Mutant from the movie 'This Island Earth' back in the 1950's, I believe. This is a latex mask, very heavy (just under 10 pounds) and is approximately 20" tall. I believe this is the first version since 2000 and is increasingly more difficult to find.
-
Here is a mint condition Smoking Robot Toy MIB tin battery toy from the Schylling Collectors Series. The Smoking Robot has been a favorite among collectors for years, with its hefty stature, dual battery legs and thick smoking action. This toy has only been opened to photograph and is in perfect shape. It requires 2 'D' cell batteries for operation.
-
Old Fashioned Double Decker Bus by Modern Toys The Old Fashioned Double Decker Bus by Modern Toys of Japan is a wonderful, large size battery operated tin bus that is new in its original box. The toy is complete with box inserts. It operates on 2 'D' cell batteries (not included) and features bump n go action. This is a beautiful mint condition toy fresh from my personal collection and is sure to please! The Double Decker Bus is a wonderful example of the standard mode of transportation of the early 20th century. The Double Decker Bus was and still is commonly used for tourism in America as well as Europe. This toy bus has many features such as mystery action, sounding horn and engine sound and funny shaking action as it rolls on its journey. This marvelous toy has never been out of the box and never seen a battery since the factory. As good as these toys get!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC