-
This listing is for a replica tin flag for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. This tin flag is a nearly exact replica of the original, almost always missing tin flag that fits to the rear of the ocean liner. A shoulder is machined onto the shaft so the flag sits and fits at the appropriate height. Other parts are available for this toy such as the light blue radar antenna and the set of two clear dome light bulb covers. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Out of stockThis is a brand new exact reproduction of the Pyro X-300 Space Cruiser manufactured by Uncle Al's Toys. A complete original toy was disassembled and molds were made of the individual pieces. As with the original, it features rolling wheels and an astronaut figure. These spaceships can be made in any color combination and more will be available here and on Ebay. The Pyro X-300 Space Cruiser is a beautiful, classic 1950's design that has withstood the test of time in it's popularity. Many different companies across the globe have taken this rocket and added there own design elements. Kleeware and Tudor Rose are two companies that offered this toy in color varieties. T. Cohn offered the rocket with their tin Space Port that would launch the rocket out of the garage and across the floor. Values continue to climb on original toys, making them somewhat unaffordable to new collectors which is why I decided to recreate the toy for those collectors. I will be making other X-300 variations myself with features such as battery operated lighting and friction/sparking drive.
-
A replacement red button for the battery-operated sound box. If your Monkeemobile is missing this button, the sound mechanism is very hard to operate. Just a drop of Super Glue will bond the replacement button to the stem. The button is translucent red, just like the original. Many additional parts are available for this toy. Please keep looking at Uncle Al's!
-
This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
-
Out of stockA wonderful, 1999 Fisher-Price Dino-roarrr TYRANNOSAURUS REX, mint carded toy. It is a newer version of the popular Fisher Price 'Puffalump' dinosaur. Dino-roars have a soft, squeezable body and makes a high shrill noise that slowly descends into a cooing, 'Aaah' sound. A fun and appealing toy for small children. This vivid orange Dino-roarrr was purchased brand new in 1999 and was kept in sealed stored condition. When squeezed, he opens his mouth and out comes the sound of a very content Dino-roarrr! Also available is an equally fun Triceratops in vivid PURPLE color. These toys are fabulous for collectors or for those parents who want to give their little ones cherished vintage gifts. Very few left in this condition that aren't already in private collections.
-
Out of stockA wonderful, 1999 Fisher Price 'Dino-roarrr' TRICERATOPS, mint carded plush toy. It is a newer version of the popular Fisher Price 'Puffalump' dinosaur. I nearly had a cow the first time my wife and I came upon our first 'Puffalump' dinosaur. He was so soft and squeezable. I just wasn't expecting the sound that came from the toy when squeezed. It starts out as a high shrill noise and slowly descends into a cooing, 'Aaah' sound. An absolute gas and I was immediately sold by its appeal to small children. The toy was purchased brand new in 1999 and it has been kept in sealed stored condition. This guy comes to you in vivid PURPLE. When squeezed, he opens his mouth and out comes the sound of a very content Dino-roar! Also available is and equally fun Tyrannosaurus Rex in vivid ORANGE color. These toys are fabulous for collectors or for those parents who want to give their little ones cherished vintage gifts. Very few left in this condition that aren't already in private collections.\
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
-
<span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts. My replacements are shown installed on one of my Cadillacs!
-
A replacement Beacon Lens for the Yonezawa, Cragstan DC-7 Automatic Multi-Action Prop-Jet Plane. Created from a mold of an original toy part to ensure the greatest accuracy. A drop of super glue will hold it in place and is guaranteed to be a perfect fit! This toy was manufactured with many different features and airline names. We offer a wide variety of additional replacement parts. Common to all the planes is the white antenna mounted behind the cockpit. Also available are the white propellers in both round or square tip, and red nacelle engine covers.
-
1950's Yonezawa Japan Atom Jet Racer, 30 " friction space concept car replacement two piece cowl lights, molded from the original parts for a perfect fit and perfect color. These are available with either flat face orange cone or pointed orange cone with gray plastic back end. The original toy cone parts have a fine male and female thread that screw together. My replacements work EXACTLY the same way to provide you the greatest authenticity when restoring your collectible Atom Jet!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC