-
Out of stockThis is The Old Timer wind-up 24-hour clock novelty from Poynter Products. It is rare and comes complete with winding key, pendulum and box.
-
Vintage Marx Battery Operated Lighted Gas Pump Island in excellent original, working condition.
-
Out of stockA wonderful 1950s wind-up key mechanical tricycle riding Santa Claus toy. There is a balloon on the back of the bell and a Merry Christmas flag. Wind up the toy and watch Santa ride in a circular motion while the bell rings.
-
A nice Holdraketa Friction Tin Rocket. Made in Hungary in 1986. A high-quality 'push and go' friction power motor. It runs horizontally until the nose bumps into something triggering another action. The rocket can stand itself upright and the ladder unfolds and drops down to the ground. Inside you will see an astronaut. Box and rocket are in good condition overall. The rocket measures 15.25" long.
-
The Toy Masters Space Survey Jeep friction toy sometimes comes with a tin astronaut driver, but always has a telescope that swings back and forth. A shaft protrudes vertically through the rear of the telescope and the antenna will rotate 360 degrees when mounted atop that shaft. Uncle Al's also fabricates the replacement telescope and cradle assembly for this toy.
-
Vintage Unique Art Wind-up Lil Abner and his Dogpatch Band with Original Box. This wonderful, all original wind-up toy spent its life as a kitchen shelf display and saw little to no use. The original cardboard box is very age worn and has been preserved to be used for display purposes with the toy. Be sure to enjoy the You Tube video of this vintage toy in action! Abner dances away while Daisy plunks on the keys of the piano. Granny sits on top to conduct the tunes and Grampy bangs the drum.
-
Out of stockYone, Japan Coffin Bank Wind Up Tin Toy with Original Box. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. No disappointments!
-
Vintage Yone SKELETON COFFIN COIN BANK Wind Up Toy. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. As happened with so many toy boxes, this box bottom was used and labeled with handwriting as shown in the picture. Every toy has a story to tell! No disappointments!
-
This listing is for one replacement tin flag for the Wolverine Carousel. The tin flag removes easily from Wolverine Carousel, which is why you often find one or more missing from the toy. The toy in the photographs is for display purposes only and not for sale.
-
Out of stock
Warner Bros Scooby Doo Vampire Plush 23 Tall
Warner Bros Scooby Doo Vampire Plush 23 Tall and a great decoration for Halloween. He is brand new with tags. The Scooby Doo Vampire Plush Halloween Door Greeter is a delightful and whimsical decorative item, perfect for adding a touch of fun and spookiness to Halloween festivities. Standing at 23 inches tall, this plush figure features the beloved character Scooby Doo dressed as a vampire, making it an adorable addition to any Halloween celebration. Ideal for Scooby Doo fans, Halloween enthusiasts, and anyone looking to bring a playful and friendly vibe to their Halloween decor. Key Features:- Charming Design: Scooby Doo is dressed in a cute vampire costume, complete with cape and fangs, capturing the spirit of Halloween while maintaining his endearing and recognizable look.
- Large Size: At 23 inches tall, this plush figure is large enough to make a noticeable and cheerful statement as a door greeter or decorative piece.
- Soft and Cuddly: Made with soft plush material, making it not only a great decoration but also a huggable companion for Scooby Doo fans.
- Versatile Decoration: Suitable for use in a variety of settings, including homes, offices, schools, or any place looking to add a bit of Halloween fun.
- Scooby Doo Fans: A must-have for fans of the Scooby Doo series, offering a unique and thematic way to show their love for the character.
- Halloween Decor: Perfect for those looking to add a friendly and playful touch to their Halloween decorations.
- Children and Families: Great for homes with children, offering a kid-friendly approach to Halloween decor.
- Collectors of Halloween Memorabilia: A charming addition to any collection of Halloween-themed items or character plushies.
-
This is a brand new replacement windshield/convertible top for the 1950's 20" tin Marx Falcon friction drive car. The top comes clear and ready for painting in your favorite color. This new top was created from a mold made from the black top in the pictures. As you can see, it's a perfect fit and the glass is clear. The mounting pins are about 1/4" long. A perfect replacement for that cracked, warped or missing top.
-
Made in the 1930s by the Wolverine Supply and Manufacturing Co., the Wolverine Zilotone musical toy features a musician playing a xylophone. Wind the toy and watch the clown move back and forth while hitting the keys with a mallet. The toy comes with one original disc, playing 'My Old Kentucky Home'. The toy winds correctly and the clown moves with his mallet to play the tune. The bottom of the clown's feet have been repaired to hold him in the correct, original operating position. A wonderful, early American toy!
-
Out of stock'Candy Vending Machine' battery operated saving bank from Wonderful Toy Company, 1950's. This RARE and highly collectible tin battery op is in excellent WORKING condition. It operates on two 'D' cell batteries. The toy has miscellaneous scratches and scuffs, mostly from the removable top tin cover. Originally designed for use with hard candies or peanuts, I recommend small 3/8 diameter wooden or plastic beads. When the cover is removed, insert the beads into the funnel. When a coin (nickels work best) is inserted into the slot, the inside of the toy lights up, Mr. Vendor cranks his handle and rotates the open top drum. As the drum opening passes under the funnel, a couple bead 'candies' fall into the drum and are dispensed through the chute at the front of the toy and the light goes out. This is an awesomely cool and not often seen toy that will be the highlight of your battery-operated toy collection - sure to please! This toy has a rarity scale number of 9 (10 being rarest) and had a book value of $1200.00 (in mint condition) in 1994. This is an extremely fragile toy. The plastic candy funnel will be removed for shipping and the cavity will be filled with styro peanuts to keep the vendor well supported for travel.
-
Perfect fit replacement rubber parts just like original! The rubber nose cone is cast to fit tightly but in the same contour of the rocket tip. The rubber fin tips just pop in. You may need to poke the old rubber bases out of the way to fit the base of the new tips into the holes. Make your XM-12 Moon Rocket a real show stopper again with these great replacement rubber parts. They are made of the same grade material as the original parts and can be installed without taking your toy apart. Also available for this toy are the crystal clear canopy. 'On/Off' ball switch and rocket engine celluloid windows.
-
XM-12 Moon Rocket - Yonezawa - Replacement Cockpit Canopy - Perfect fit replacement, orange color molded just like original! You get one switch ball exactly as shown. The ball can be glued onto the switch with super glue to hold it fast. Our switch ball was created from a mold taken of an excellent condition original part in order to provide you the finest nearly exact copy available. We also offer other parts for this toy and are experts in it's repair and restoration. We will be offering replacement snap on tin fins and the twist on rear plated exhaust with light in the very near future!
-
New in the box. This miniature collectible is an exact replica of a 1950'S Bullet Car. It measures approximately 6-3/4” long and has rotating wheels and authentic detailing. This collectible is number 06612 of a 15,000 piece edition and includes a certificate of authenticity. Release date: 1998
-
Yanoman Space Scout S-17 Space Toy replacement metal antenna.
-
This RARE, Yonezawa Alfa 53 Racer 11 Friction Drive DD comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 11" in length and 4 1/2" high to the top of the driver's helmet. This is an incredible, rare toy featuring the extremely unique, painted 'Sports' hubcaps. I don't believe these have been offered on any other Yonezawa car. Zero disappointments and an absolute 'must have' for the serious Indy car, open wheel racer collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
-
Replacement set of cone shaped tail lights for the 1950's Yonezawa Atom Jet 30" Racer. Tail lights are sold in a set of 3 so that they will all be the same color when installed. The toy has to be opened up in order to properly install the lights. These parts are an exact copy of the originals, including the molded internal threads. I also have these cones in GRAY as they are used with the cowl lights on this toy. I have these parts with male external threads as well as the female threads shown. These parts are in stock and ready to go. The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
Replacement hubcap for the 1950's Yonezawa Atom Jet Racer. This hubcap is an exact copy of the originals. The hubcap is nickel plated and the Atom script is hand painted.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
Replacement tires for the 1950's Yonezawa Atom Jet Racer. Tires are an exact copy of the originals.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
1950's Yonezawa Japan Atom Jet Racer, 30 " friction space concept car replacement two piece cowl lights, molded from the original parts for a perfect fit and perfect color. These are available with either flat face orange cone or pointed orange cone with gray plastic back end. The original toy cone parts have a fine male and female thread that screw together. My replacements work EXACTLY the same way to provide you the greatest authenticity when restoring your collectible Atom Jet!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC