-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
A wonderful Marusan, Japan Sunbeam Motorcycle with Sidecar battery-operated toy in excellent, fully working condition. The Sunbeam operates with two 'D' cell batteries inserted into the sidecar. The sidecar switch operates the headlight, red license plate, taillight and the front running light. Upon battery insertion and without operating the light switch, power is instantly available to the electric motor to power the bike. The bike operates by switch movement on the gas tank. First gear is slow speed, second gear for higher speed and neutral or 'off'. The front fork is steerable and can be positioned for straight or circular motoring direction. These were very sensitive and fragile toys and most became shelf displays due to mishandling. This toy has been thoroughly checked and adjusted for superior function. Truly a delight and a must have for motorcycle collectors and enthusiasts alike!
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
This is a replacement head for the 1939 Ideal Novelty and Toy Company, Superman composition toy/doll figure. This is the first known Superman toy and they are extremely rare and in high demand. This replacement head was created from a mold made of an original head. This resin cast replacement comes with a metal loop inside, just as original, so that it will accept the spring and metal hook that comprise the flexible joints of the legs. Please allow 14 days from the time of ordering and purchase as these are made to order.
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
TN Nomura Astronaut Helmet. A replacement astronaut helmet for the battery-operated Nomura Moon Patrol Space Division #3 or the Mobile Space TV Unit with Trailer. Created from a mold taken of the original toy part to guarantee a perfect fit. The helmet includes both a red and yellow cone. The red cone is correct for the Mobile Space TV Unit with Trailer and the yellow cone is correct for the Nomura Moon Patrol.
-
Old Fashioned Double Decker Bus by Modern Toys The Old Fashioned Double Decker Bus by Modern Toys of Japan is a wonderful, large size battery operated tin bus that is new in its original box. The toy is complete with box inserts. It operates on 2 'D' cell batteries (not included) and features bump n go action. This is a beautiful mint condition toy fresh from my personal collection and is sure to please! The Double Decker Bus is a wonderful example of the standard mode of transportation of the early 20th century. The Double Decker Bus was and still is commonly used for tourism in America as well as Europe. This toy bus has many features such as mystery action, sounding horn and engine sound and funny shaking action as it rolls on its journey. This marvelous toy has never been out of the box and never seen a battery since the factory. As good as these toys get!
-
A reproduction metal cast anchor which fits the early 1900’s Large Marklin battleships. This anchor will fit the Battleship New York, Columbia and several others. Available in painted (black) or unpainted condition. I had the pleasure of performing some intricate repairs on a Columbia Battleship. Part of the Malcolm Forbes Collection and acquired at auction by The Dallas Elite Toy Museum. Other custom parts are available upon request.
-
This is a Bandai 1959 Cadillac tin friction car in excellent original condition. The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC