-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
A great replacement tire for the 1930's Tippco Mercedes Fuhrerwagen Staff Car. The tire is created from a mold taken of an original part. It is made of SOLID RUBBER and a perfect fit, just like the original. The tire can be purchased individually or in a set of five to complete one car. Other Tippco Mercedes parts are available.
-
Replica Knockoff Spinner for Exclusive Sears Indy 500 Turnpike Racers Replica Knockoff Spinner for the Exclusive Sears Indy 500 Turnpike Racers - This listing is for new, white metal reproduction knockoff spinners for the Sears Exclusive battery operated Indianapolis 500 Race Car or the Sears Turnpike Line friction racer and the Sears Indy 500 friction racer. These three toys utilize the same master cast spinner but have different threaded diameters. The battery operated spinner has a smaller diameter hole than the friction cars so PLEASE SPECIFY which spinner you need when you purchase. The white metal castings are a bit softer and the wings are a bit thicker than the originals but as you can see, they look and work great. Holes come drilled and tapped so all you have to do is put them on your cars. Please also note that these are fabricated to mount on original car threaded studs. If someone has broken the original studs and replaced with an aftermarket screw, these will not work. When viewing the pictures, the white Indy 500 car is sporting the new knockoffs. The green Turnpike racer has original cast spinners. Note the larger mounting stud of the Turnpike car. These parts are in stock and ready to go.
-
Masudaya Queen of the Sea Replacement Light Domes, Set of TWO - This listing is for a set of TWO replacement light bulb covers for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. These covers are and exact replica of the original toy parts and are guaranteed a perfect fit - just pop them on! Other parts are available for this toy such as the light blue radar antenna and the always missing rear tin flag. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
1969 Plymouth GTX Diecast Super Stock Model Car
Produced by Ertl Collectibles in 2000, the 1969 Plymouth GTX diecast model car is No. 2 in the Heritage Series and part of a Limited Edition of 5000 cars. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth GTX. The team won many national events and titles over the years and ran many different cars and classes. They competed in NHRA, AHRA and IHRA sanctioned events, and they would modify the car to fit the class at that event. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-13.5 x W-6.25 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors! -
1969 1/2 Plymouth Road Runner Diecast
Produced by Ertl Collectibles in 2008, the 1969 1/2 Plymouth Road Runner diecast model car is No. 10 in the Sox & Martin Series and part of a Limited Edition. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth Road Runner. The mid year introduction of the 440 6BBL Road Runner was designated to bridge the gap between the 383 cubic inch V-8 and the much more costly 426 HEMI. The 69 1/2 6BBL package included a flat black fiberglass hood, four speed manual trans, a Dana rear axle with a 4.10 gear ratio, and three two carburetors a top an aluminum Edelbrock intake manifold and was rated 390 hp. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11.25, W-4.5, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors! -
Produced by Ertl Collectibles in 2002 the 1970 Plymouth Cuda diecast model car is Pro Stock Series #4 Issue No. 4 and part of a Limited Edition. This model is a true-to-scale replica of the 1970 Plymouth driven by professional drag racer Don Grotheer. Don's Super Stock Plymouth race cars were always a contender at any racing event. His familiar orange, blue and white race cars looked as good as they ran. In 1970 he built and raced one of the first Barracuda Pro Stockers. The new Pro Stock class was a heads up class, with no handicaps. It also allowed the racers the use of fiberglass hoods and fenders and many engine modifications. These rules resulted in some of the fastest door slammers in the sport of drag racing at the time. This 1970 Plymouth Cuda diecast model features opening hood and doors, race oil pan, a detailed 426 Hemi Engine, authentic paint colors and a beautifully detailed interior. The dimensions of the car are approximately L-10, W-4, H-3 inches. The window box dimensions are L-13.5 x W-6.5 x H-6 inches. The model is still in its original packaging. It was never displayed and the box shows minimal wear from storage. A must have for true collectors!
-
Hot Wheels 1932 Ford Diecast Model Car, Deuces Wild, High Boy Street Rod, designed by Greg Padington and produced by Mattel in 2000. Brand new in the box with minimal shelf wear.
-
The 1969 Pontiac GTO Restoration Alley diecast model car by MotorMax is a limited edition model of 1200 pieces. The highly-detailed model features opening doors and trunk, removable front hood, chrome accents, and posable front tires. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-14 x W-6.5 x H-4.75 inches. The model is new in its original packaging with the plastic banding still around the model. The box shows minimal storage wear. A must have for true collectors!
-
Produced by RC2 Collectibles in 2005, the 1971 Dodge Hemi Rod Shop Challenger SS/DA 1:18 scale diecast model car is part of the Supercar Collectibles series of custom, limited edition cars. This MOPAR diecast model is a true-to-scale replica of one of the cars owned by Gil Kirk's famous Rod Shop. The Rod Shop was a well known Speed Shop in the Columbus Ohio area. In 1971, Gil Kirk and Jim Thompson got together with Chrysler and formed an all Dodge race team. The scope of the team was considerable, participating in many of the sportsman classes and Pro Stock. The highly-detailed model features an opening doors, trunk, and hood, steerable front wheels, and a beautifully detailed interior and chassis. The dimensions of the car are approximately L-10.5, W-4, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The car is still in its original packaging. Never displayed and the box only shows minor storage wear. A must have for true collectors!
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
Alps Lincoln Futura Metal Steering Wheel is an exact fitting replica of the original toy steering wheel. This part will fit all variations of the Alps Futura cars; friction, battery operated, and remote control. The replacement wheel mounts to the toy using the same tab/slot configuration and is easy to install. Also available for this toy are the rubber tires and the spring shaft deck antenna. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in the tin.
-
Hootin’ Hollow Haunted House Skeleton is a perfect reproduction of the original toy part. If your haunted house is missing the skeleton that’s jumping out of the chimney, your prayers are answered! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
Hootin Hollow Haunted House Button is a perfect reproduction of the original toy part. If your haunted house is missing any of the little buttons for operating the different house functions, your prayers are answered! We carefully color match our plastic to blend in our new buttons with your existing toy buttons. Marx Hootin Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a skeleton that jumps out of the chimney, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features operate by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the jumping skeleton, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Here is a nice set of replacement rubber grips for your Marusan Sunbeam motorcycle toy. These grips were reproduced from molds taken of original rubber grips and then re-cast in rubber for a perfect, tight fit and an exact reproduced part for authenticity. These will also fit the Bandai Meguro Motorcycle toys. Dramatically improve the look of your bikes if your grips are worn, old and split or just plain missing.
-
This listing is for a new replacement engine cover for the Nomura R-10 VW Space Patrol Car or for the Nomura Piston Tractor. This clear engine cover may have been used on other Nomura toys that I'm unaware of. The part was created from a mold taken of an original toy part and is guaranteed a perfect fit and crystal clear. The toys pictured are used to clarify the part in this listing and are NOT INCLUDED or for sale.
-
Santa & Friends action figures from the Holiday TV classic "Rudolph the Red-Nosed Reindeer and the Island of Misfit Toys". This exceptionally well-made set from the Memory Lane collection is from my wife's personal holiday collection. The package is open but complete with all of the accessories. The set includes Mrs. Claus, Skinny Santa, baby Rudolph & Foreman Elf. This set originally sold in 2002 by Playing Mantis. Remember to check out the shop for our other Rudolph items.
-
2004 Menards Enchanted Forest Collection 72" Standing Santa Figure We purchased this beautiful, 6' tall Old World Santa figure from our local Menards store back in 2004. Santa is extremely lifelike with thick beard, piercing eyes and real glasses! His burgandy/sage hooded robe is full and soft, covering a full length golden inner garment. The body comes in two pieces that need to be assembled; held together by 4 wing nuts and mounted to a sturdy wooden base. We displayed this Santa in our home the first year after purchasing and he has been in climate controlled storage since. I have not been able to locate a finer, LIFE SIZE Santa anywhere in my searches. This particular Santa was only offered by Menards one year and then the item was retired, as is the case with most Menards Enchanted Forest items. This item is large in its original packing box - 44" X 24" X 17" and approximately 40 pounds. Local pick up in Los Alamitos, California is preferred or shipping by freight.
-
1930's Strauss Tin Litho Wind-up Inter-State Bus (Green version) - Produced by the Ferdinand Strauss Company of New York. The The litho shows normal play wear and the wind-up mechanism has a built-in key that is in good working order.
-
Super Space Giant Robot brand new in the box and ready for action! This battery operated robot stands 17" Tall and features a stop and go action and his chest door swings open displaying a blinking and shooting gun making a realistic shooting noise. This is a reproduction of the original. The trademark on the box is R.M. This item has been in storage and is in new condition.
-
Poynter Products Belly Banks are comical characters dressed for purely casual recreation. Each "Weekend Sportsman" comes equipped with an interchangeable golf club, baseball bat, tennis racket and pressure sensitive cola or beer label to apply on can. But he's a bank too! Raise his arm and his tongue comes out. Place a coin on his tongue, and as you lower his arm he swallows the coin. As the money accumulates, his belly grows and grows and grows.
-
LS Thompson Submachine Gun with Box Magazine 1921AC Standard Type plastic model kit. The kit is in unused/opened condition. The original instructions are missing and the box shows normal shelf wear. A copy of the instructions for the LS Drum Magazine machine gun are included to aid assembly.
-
Replica Batman Batcuffs 1966 Ideal Batman Utility Belt Accessory
Replica Batman Batcuffs for the 1966 Ideal Batman Utility Belt. An accessory for the utility belt worn by Batman in the original 1966 TV series. These batcuffs are an exact replica of the original. -
This listing is for a plastic replacement battery cover for the Melvin G Miller Texas Oil Well Pumping Unit. The battery cover comes in red or white and the wording can say Humble or Wildcat. Please specify your selection when you place the order. You will receive one replacement battery cover. The pumping unit in the picture is for display purposes only.
-
A replacement Red Canopy for the Nomura 3 Stage Rocket. Created from a mold taken of the original toy part and is guaranteed to be a perfect fit.
-
A flexible plastic propeller for the Rosko Toy Viscount Airliner aircraft toy. The prop is slightly more flexible than the original part. The wing must be disassembled in order to correctly install this propeller.
-
Marx Electra II Propeller, Square Tip, Replacement Plastic NEW flexible plastic propellers for the Marx Electra II aircraft toys are the perfect solution to those old broken or glue covered propellers. These new props are a bit more flexible than the originals propellers. It installs easily.
-
A new replacement seat for the Bandai Silver Pigeon Scooter. Molded and cast from an original seat so the shape and diameter are a perfect fit. The rubber hand grips for this toy are also available.
-
A nice replica Antenna for the Alps Television Spaceman Robot.
-
Tin replacement battery box cover for the battery operated Yonezawa Electro Special 21 Racer. These are often missing from the 21 cars. The tooling for this cover was created from an original cover to ensure a perfect, factory fit. The cover is primed and finished in an automotive lacquer that matches the Yonezawa black color and then polished. Just remove from the package and install on your car. Absolutely no disappointments with this part! Other parts are available for this toy. The toy pictured is used to clarify the part in this listing and is not for sale.
-
Replacement steering knuckle for the battery operated Yonezawa Electro Special 21 Racer. These are often broken on the 21 cars. The tooling for this part is created from an original steering knuckle to ensure a perfect, factory fit. Just remove from the package and install on your car. Absolutely no disappointments with this part! Other parts are available for this toy. The toy pictured is used to clarify the part in this listing and is not for sale.
-
Alps Television Spaceman and Revolving Flashing (Door) Robot Replica Ears. These new red ears come as a set to complete your toy. Simply glue in place with a few drops of super glue.
-
Yonezawa Talking Robot Battery Door and Arm Buttons
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC