-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
TN Nomura Astronaut Helmet. A replacement astronaut helmet for the battery-operated Nomura Moon Patrol Space Division #3 or the Mobile Space TV Unit with Trailer. Created from a mold taken of the original toy part to guarantee a perfect fit. The helmet includes both a red and yellow cone. The red cone is correct for the Mobile Space TV Unit with Trailer and the yellow cone is correct for the Nomura Moon Patrol.
-
Old Fashioned Double Decker Bus by Modern Toys The Old Fashioned Double Decker Bus by Modern Toys of Japan is a wonderful, large size battery operated tin bus that is new in its original box. The toy is complete with box inserts. It operates on 2 'D' cell batteries (not included) and features bump n go action. This is a beautiful mint condition toy fresh from my personal collection and is sure to please! The Double Decker Bus is a wonderful example of the standard mode of transportation of the early 20th century. The Double Decker Bus was and still is commonly used for tourism in America as well as Europe. This toy bus has many features such as mystery action, sounding horn and engine sound and funny shaking action as it rolls on its journey. This marvelous toy has never been out of the box and never seen a battery since the factory. As good as these toys get!
-
A reproduction metal cast anchor which fits the early 1900’s Large Marklin battleships. This anchor will fit the Battleship New York, Columbia and several others. Available in painted (black) or unpainted condition. I had the pleasure of performing some intricate repairs on a Columbia Battleship. Part of the Malcolm Forbes Collection and acquired at auction by The Dallas Elite Toy Museum. Other custom parts are available upon request.
-
This is a Bandai 1959 Cadillac tin friction car in excellent original condition. The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Comet Monorail Battery Operated Toy, TN Nomura Japan is in excellent working condition. This toy comes complete with metal track and the original box. The Monorail car operates on 'D' cell batteries. It features forward and reverse action and has red and green lights which correspond with the movement. The track layout is approximately 20" by 30". The Monorail car is suspended by the metal uprights and wire track that snap together to form the layout. The litho is bright and crisp and shows very light playwear overall. This toy was produced in the 1950's in Japan due in part to the popularity of the Disneyland Theme Park Monorail in California. It can be played with or used as an attractive display piece.
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
This is a wonderful Alps Auto Doggie Mustang Convertible Battery Operated Tin Car, made in Japan. The toy is a 'Bump N' Go multi directional mover. Auto Doggie is in excellent working condition with the original driver and a replacement dog. (The other dog ran away . . .) When the toy is in play, the car moves about the room and the doggie barks and makes a jumping movement in the passenger seat. It's a large toy measuring 14" long and 5" wide. It is in excellent working condition and is always in a glass cabinet on display in my collection.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC