-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
A great replacement tire for the 1930's Tippco Mercedes Fuhrerwagen Staff Car. The tire is created from a mold taken of an original part. It is made of SOLID RUBBER and a perfect fit, just like the original. The tire can be purchased individually or in a set of five to complete one car. Other Tippco Mercedes parts are available.
-
Replica Knockoff Spinner for Exclusive Sears Indy 500 Turnpike Racers Replica Knockoff Spinner for the Exclusive Sears Indy 500 Turnpike Racers - This listing is for new, white metal reproduction knockoff spinners for the Sears Exclusive battery operated Indianapolis 500 Race Car or the Sears Turnpike Line friction racer and the Sears Indy 500 friction racer. These three toys utilize the same master cast spinner but have different threaded diameters. The battery operated spinner has a smaller diameter hole than the friction cars so PLEASE SPECIFY which spinner you need when you purchase. The white metal castings are a bit softer and the wings are a bit thicker than the originals but as you can see, they look and work great. Holes come drilled and tapped so all you have to do is put them on your cars. Please also note that these are fabricated to mount on original car threaded studs. If someone has broken the original studs and replaced with an aftermarket screw, these will not work. When viewing the pictures, the white Indy 500 car is sporting the new knockoffs. The green Turnpike racer has original cast spinners. Note the larger mounting stud of the Turnpike car. These parts are in stock and ready to go.
-
Masudaya Queen of the Sea Replacement Light Domes, Set of TWO - This listing is for a set of TWO replacement light bulb covers for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. These covers are and exact replica of the original toy parts and are guaranteed a perfect fit - just pop them on! Other parts are available for this toy such as the light blue radar antenna and the always missing rear tin flag. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
1969 Plymouth GTX Diecast Super Stock Model Car
Produced by Ertl Collectibles in 2000, the 1969 Plymouth GTX diecast model car is No. 2 in the Heritage Series and part of a Limited Edition of 5000 cars. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth GTX. The team won many national events and titles over the years and ran many different cars and classes. They competed in NHRA, AHRA and IHRA sanctioned events, and they would modify the car to fit the class at that event. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-13.5 x W-6.25 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors! -
1969 1/2 Plymouth Road Runner Diecast
Produced by Ertl Collectibles in 2008, the 1969 1/2 Plymouth Road Runner diecast model car is No. 10 in the Sox & Martin Series and part of a Limited Edition. This model is a true-to-scale replica of MOPAR Professional Drag Race Team Ronnie Sox and Buddy Martin's signature Red, White and Blue Plymouth Road Runner. The mid year introduction of the 440 6BBL Road Runner was designated to bridge the gap between the 383 cubic inch V-8 and the much more costly 426 HEMI. The 69 1/2 6BBL package included a flat black fiberglass hood, four speed manual trans, a Dana rear axle with a 4.10 gear ratio, and three two carburetors a top an aluminum Edelbrock intake manifold and was rated 390 hp. This diecast model features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-11.25, W-4.5, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors! -
Produced by Ertl Collectibles in 2002 the 1970 Plymouth Cuda diecast model car is Pro Stock Series #4 Issue No. 4 and part of a Limited Edition. This model is a true-to-scale replica of the 1970 Plymouth driven by professional drag racer Don Grotheer. Don's Super Stock Plymouth race cars were always a contender at any racing event. His familiar orange, blue and white race cars looked as good as they ran. In 1970 he built and raced one of the first Barracuda Pro Stockers. The new Pro Stock class was a heads up class, with no handicaps. It also allowed the racers the use of fiberglass hoods and fenders and many engine modifications. These rules resulted in some of the fastest door slammers in the sport of drag racing at the time. This 1970 Plymouth Cuda diecast model features opening hood and doors, race oil pan, a detailed 426 Hemi Engine, authentic paint colors and a beautifully detailed interior. The dimensions of the car are approximately L-10, W-4, H-3 inches. The window box dimensions are L-13.5 x W-6.5 x H-6 inches. The model is still in its original packaging. It was never displayed and the box shows minimal wear from storage. A must have for true collectors!
-
Hot Wheels 1932 Ford Diecast Model Car, Deuces Wild, High Boy Street Rod, designed by Greg Padington and produced by Mattel in 2000. Brand new in the box with minimal shelf wear.
-
The 1969 Pontiac GTO Restoration Alley diecast model car by MotorMax is a limited edition model of 1200 pieces. The highly-detailed model features opening doors and trunk, removable front hood, chrome accents, and posable front tires. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-14 x W-6.5 x H-4.75 inches. The model is new in its original packaging with the plastic banding still around the model. The box shows minimal storage wear. A must have for true collectors!
-
Produced by RC2 Collectibles in 2005, the 1971 Dodge Hemi Rod Shop Challenger SS/DA 1:18 scale diecast model car is part of the Supercar Collectibles series of custom, limited edition cars. This MOPAR diecast model is a true-to-scale replica of one of the cars owned by Gil Kirk's famous Rod Shop. The Rod Shop was a well known Speed Shop in the Columbus Ohio area. In 1971, Gil Kirk and Jim Thompson got together with Chrysler and formed an all Dodge race team. The scope of the team was considerable, participating in many of the sportsman classes and Pro Stock. The highly-detailed model features an opening doors, trunk, and hood, steerable front wheels, and a beautifully detailed interior and chassis. The dimensions of the car are approximately L-10.5, W-4, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The car is still in its original packaging. Never displayed and the box only shows minor storage wear. A must have for true collectors!
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC