-
The Ichiko 1962 Ford Galaxie German Polizie Car Friction and Battery Toy is a crafted replica of the classic 1962 Ford Galaxie, distinct style of the German police force (Polizei) vehicles of that era.
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Irwin Toys Spaceman Wind Up 1950's Orange USA wind-up toy in beautiful replica box made in the USA. Spaceman is a plastic wind-up toy just under 11" tall to the top of his antenna. When you wind him up, he walks forward with a swaying motion and alternately swings his ray guns. This toy was molded in several colors, red being one of the rarest. This toy is completely molded in orange.
-
This is the I.W.G. Rocket Ship, Rocket World, Green Version in Box. It is an extremely fun sort of 'steam punky' rocket ship with a light up cockpit and crazy animal figure. I know there is a whole back story to the Stange Co. Rocket World toy offerings in this series but the large rocket ships really got to me! These are VERY hard to come by now and go for a premium price when you can find them. This toy comes complete with the inserts and original box. The gun fell out of the blister insert during the photo shoot but it's there.
-
This is a beautiful, all original, J E Stevens Mechanical Bank, BALD EAGLE & Eaglets c. 1883. In wonderful operating condition with the original 'chirp' box. Insert the coin into the eagle's beak and rotate the 'snake' lever. Watch the mother eagle tilt forward and drop the coin into the nest with the eaglets. The bank emits a 'chirp' noise to complete the coin drop cycle. Additionally, the finish on the bank is still vibrant and excellent. A very nice and rare color scheme is hand painted on the bank.
-
This is a RARE, Full House Productions (2011) Jack In The Boxxx Limited Edition Series 1. As you turn the crank, the melody XXX plays until the jester pops up with a 1 finger salute. A very naughty and impossible to find gift! I believe this was a very short-lived company, as there is no current information regarding their current status or other products offered, making this a truly unique item. Risque humor very reminiscent of the Poynter Products Novelty Company.
-
A very nice Jenny the Balky Mule tin litho windup toy with built-in key by the Ferdinand Strauss Corporation. Circa late 1920's, the toy is wound with a key located on the underside of the cart. Wind the key and watch the wheels turn, the mule balk and the farmer rock back and forth.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Jo-Han Sox & Martin Superbird 1:25 Scale Plastic Model Kit #C-1770. The wild super stocker. Molded in white, clear and plated parts.
-
Jupiter 2 Lost in Space Model Kit 1/35 Scale Sealed Moebius Models 2018. Assembled kit is 18 inches in diameter.
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Kyodo Press Co. KDP Tom and Dick Metal Rail Road Key Wind Hand Car toy. Works well and very whimsical!
-
See and hear the big bird in action. Watch it load and unload as it prepares for takeoff with roaring sounds and flashing lights. One of my favorite toys to display and operate for family and guests at Christmas, during the 1980's. This is also one of the first Chinese battery toys to enter the US market. An awesome toy that has only been owned and operated by me!
-
A Lehmann Brandenburg Dancing Sailor wind-up tin toy in good, fully working condition. Made in Germany between 1904 and 1948 with a dark blue ribbon representing the vessel Columbia. There is some tattering of the cloth, expected on a toy of this age.
-
Lehmann Duo Rooster and Rabbit Cart Wind Up toy in marvelous shape. This wonderful, whimsical toy from the early 1920's is pure joy to display as fine art! The original lithography is in excellent shape and the wind-up mechanism is strong. In general, the biggest complaint about this toy is the poor performing walking action of the rooster and the drive wheel's tendency to just spin without gaining traction. Because of these issues, these toys spend the majority of their lives sitting on shelves, just to be admired. Our Duo Rooster and Rabbit is 100% original, with the exception of Mr. Rabbit's ears which were fabricated by Uncle Al. This is sure to delight Lehmann toy collectors or collectors of toy animals from the early 20th century.
-
Out of stockLindberg Little Red Wagon 1:25 Plastic Model Kit #72158. Molded in hi-gloss plastic so no painting is necessary. Offers 2 fully detailed engine choices and hemi-head racing 426. Also features vinyl tires and clicks, detailed interior, opening hinged doors, and chrome plated parts.
-
Lindberg Little Red Wagon Drag Racing Team 1:25 Static Model Kit SEALED. Features include detailed chassis, engine, tires, and interior. Chrome plated parts. Also features the incredible Dodge race truck hauler!
-
Lindberg Power Drive Unit R/C Twin Engine Drive System for Boats. A plug-in electric system designed for Lindberg R/C Boats and other boats of similar size. This system is designed to be used with Lindbergs 30" Chris Craft Constellation, the 30" Chris Craft Sportfisherman, the JFK PT-109 1/32 scale and the Blue Devil Destroyer. I installed one of these kits in a Chris Craft Constellation and the power is extremely impressive. It is also an extremely simple installation with very straight forward instructions. When first offered, these kits retailed for $135.00 in most hobby stores. They are exceedingly rare to find in new condition.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC